WILO (Melrose Park, IL) introduces a line of high-efficiency circulators: the Stratos. The line can reduce consumption by up to 80 percent over single-speed pumps by incorporating electronic commutated motor (ECM) technology and a variable speed drive, resulting in greater efficiency than asynchronous motors.
Precision AirConvey (Newark, DE) has developed the TrimPAC Velocity trimming system, which automatically captures continuous edge trim at the press, slitter, or die cutter and directs waste material into a container. The trimmer is ideal for manufacturers dealing with paper, film, foil, or laminate in a variety of widths and thicknesses.
Balluff (Florence, KY) has introduced Sharpshooter, a vision-based sensor at a low price point. The new Sharpshooter adds 360° part rotation recognition, in addition to an output logic that can link together any number of tools. An updated version of the free ConVis configuration and emulation software comes with the sensor, adding DHCP functionality to remotely assign IP addresses.
caption Gateway Safety (Cleveland, OH) has developed a line of StarLite GUMBALLS, PPE-compliant protective eyewear that feature ten different, vibrantly-colored designs. Workers can pick the “flavor” that represents their personal energy or a color that accents their look for the day with blueberry, cherry red, cotton candy, orange, lemon yellow, lime green, grape, vanilla, mocha brown, and black licorice temples, all with clear lenses.
caption LumaSense Technologies (Santa Clara, CA) has announced the release of its new Mikron MikroSHOT thermal imaging camera. The MikroSHOT is the latest offering from LumaSense Technologies’ Mikron Infrared thermal imaging product line. This handy and fully radiometric thermal imager allows for affordable pocket-sized portability with capabilities normally found in larger, more expensive thermal imagers.
Channellock (Meadville, PA) has introduced 23 new and improved screwdrivers and nutdrivers to the CODE BLUE(Reg) line. Highlights of the improved line include: Seven new slotted screwdrivers, measuring 3/16” x 4”, 3/16” x 6”, 3/16” x 8”, 1/4” x 1 1/2”, 1/4” x 4”, 1/4” x 6”, and 3/8” x 8”.
Fairchild Industrial Products (Winston-Salem, NC) has designed a pressure regulator — the model M4100 — with a large diaphragm to provide accuracy for precision control in low-pressure applications like leak detection or tank blanketing. The M4100 shines in applications requiring accuracy within +/- 0.
After 80 years of New Orleans’ humid summers, a distribution facility for Lafarge, one of the largest cement producers in the United States and Canada, was literally crumbling. So the company called in a team of maintenance experts to salvage the distribution facility. David Soch and Emmett Moore quickly compiled a laundry list of maintenance problems, ranging from mechanical issues with the gates used to control the flow of cement, to changing the light bulbs that illuminated the truck loading area.
Extech Instruments (Waltham, MA) has developed the new EX840, the first-ever 1000A CAT IV clamp meter with built-in infrared thermometer with double-molded housing. The EX840 features non-contact IR temperature measurements with a laser pointer. Other features include: Measurements of AC/DC voltage, resistance, capacitance, frequency, diode, and continuity.
Herkules Equipment Corp. (Walled Lake, MI) has designed a cart positioner for a plant’s F2 cart to reduce ergonomic issues that inevitably arise. Operators can easily raise and lower material on the cars to a desired height, reducing back strain and other potential injuries when loading or unloading.
Ludeca (Doral, FL) has developed INCLINEO, a level/plumbness measurement system utilizing high-precision inclinometer technology with a resolution of 0.0003 degrees. The product can measure relative or absolute angularity, flatness, levelness, or parallelism or surface — its flexibility makes it possible to check the geometry of CNC machines in addition to the plumbness of hydro turbines.
LPS Laboratories (Tucker, GA) introduces the G-49 Orange Degreaser with a low volatile organic compound (VOC) content. G-49 conforms to the VOC regulations of CARB, OTC< and LADCO. G-49 is ideal for cleaning equipment, whether it is afflicted with grease, grime, or oil, and is an excellent alternative to methyl ethyl ketone.
Wilcoxon (Germantown, MD) had added three new accelerometers with M12 connectors to its product line of vibration sensors and sensor networks. The M12 connector is an established protocol throughout the world, and several M12-compatible assemblies are now available.
Tingue, Brown & Co. (Saddle Brooke, NJ) introduces a new line of casters for carts, trucks, and containers, offered as replacements for failed OEM components. The line provides up to 675 pounds of weight-bearing capacity per caster — ideal for facilities where casters often fail under heavy loads with carts remain intact.
Vent-A-Kiln (Buffalo, NY) has developed the Portable Fume Exhauster (Model PFE), an efficient solution for removing and ventilating fumes produced by welding, brazing, soldering, and plasma cutting. The Model PFE is a mobile version of the wall-mounted Model FE, and yet is a complete, self-contained unit which can be wheeled into any location.
Cleaver-Books (Milwaukee, WI) introduces SysteMAX, a microprocessor-based wireless control for boiler rooms. SysteMAX uses 64 I/O points for controlling multiple boilers, pumps, and dampers while matching system load. Also, the control can adjust boiler sequencing and firing rate based on real-time variances from outdoor temperature, supply/return temperatures, and flow.
Binmaster (Lincoln, NE) has developed its SmartBob C-50 Analog Expansion Console, which enables monitoring of multiple bins equipped with SmartBob2 or SmartBob-TS1 sensors from a single C-100 console. The C-50 is the latest addition to Binmaster’s cable-based inventory tracking system, which is designed to measure the level of powders, ganules, pellets, and dry bulk solids, in addition to liquids.
Balluff (Florence, KY) has developed a new direct metal-mount RFID system, which allows the tag to be mounted directly on any alloy or metal surface without the typical interference. This RFID system uses non-contract, ISO 15693 compliant passive data carrier technology.