Royal Adhesives and Sealants LLC (South Bend, IN) announces the launch of its new line of Silaprene LVOC (low-volatile organic content) contact adhesives and cements. These new adhesives and cements are EPA-compliant and contain less than 250 grams per liter of VOCs compared to over 600 grams per liter of VOCs in traditional solvent-based contact adhesives and cements.
Detcon (The Woodlands, TX) has reengineered its gas detection sensor, named the Series 200 UniTox, to included a significantly-improved mechanical assembly and a more economical price. The UniTox line incorporates a common Universal Transmitter Module with a wide range of Intelligent Sensor Modules (ISM) capable of monitoring more than 40 toxic gases.
SATO (Charlotte, NC) has announced that SATO printers currently support the GS1 Composite Symbology — GS1 DataBar. The DataBar makes printing on small, hard-to-mark items like loose produce easy. The system can even provide barcode information, like weight, price, or data codes.
Nilfisk CFM (Malvern, PA) announces the launch of a new micro-site that specifically address the potentially-dangerous issue of combustible dust in the manufacturing industry. The website can be seen at www.explosionproof-vacuum.com . The website utilizes video, fact sheets, application photos, and links to sites like OSHA to provide manufacturers access to pertinent information regarding combustible dust.
LEWCO (Sandusky, OH) is offering a line of conveyors that utilize 24 volt DC technology, including a chain-drive live roller, belt-driven live roller, and a chain conveyor. With the 24 volt DC technology, zero-pressure zoned accumulation conveyors can be constructed without the typical limitations found with most O-ring drive conveyors.
Kadant AES (Queensbury, NY) extends its line of cleaning and conditioning products with the release of its Genesis™ modular shower system. The base module includes a single tube shower pipe, along with spray nozzles, but the system can be upgraded with internal stainless steel brushes, oscillation, and a second tube for better performance.
igus (East Providence, RI) has developed the Rol-E-Chain cable carriers, which have built-in wheels to facilitate travel over long distances, such as on a crane. The wheels are integrated into the cable carrier’s side links to reduce friction, which allows travels over 2,600 feet at speeds up to 32.
SICK (Minneapolis, MN) announces the LMS100 and LMS111 series of non-safety rated laser measurement system sensors. The LMS111 system is a non-contact sensor specifically designed for outdoor anti-collision environments, while the LMS100 is designed for indoor profiling.
Martin Tool & Forge (Fort Worth, TX) has added powder coated handles to its line of broached crank handles. The black epoxy powder coating offers an improved appearance over a basic mill finish, and is impact, abrasion, and chemical resistant. The 11 stock sizes are available with square bores from 1/2 to 1”.
Megator (Pittsburgh, PA) introduces the Positive Displacement Sliding Shoe Pump, which is self-priming, and features exceptional suction performance and versatility. The pump can run dry without damage, but also pumps at constant capacity against carrying heads up to 250 feet (110 psi).
Castell’s (Erlanger, KY) portfolio of trapped key interlocks and loading dock guarding systems has been added to Tapeswitch’s product lineup, now available in the U.S. The interlocks ensure personnel follow a predetermined sequence of tasks to control process risks by locking valves, actuators, switches, doors, or entire processes until the correct key is used.
Dynabrade, Inc. (Clarence, NY) introduces a new series of air-powered vacuum disc sanders. The new tool is effective at removing coatings while capturing contaminants through the vacuum. The sanders are available in 2, 3, 5, and 7” diameters, and the vacuum shroud diverts dust and debris to the vacuum source.
seepex (Enon, OH) has developed a new integrated drive for its popular line of metering and general transfer progressive cavity pumps. The new drive features a single reduction gear box and an inverter-rated 1/2 HP electric induction motor. Because external control enclosures are not required for high pressure or run-dry protection, installation is simple and quick.
Garlock Safety Systems (Plymouth, MN) has developed the LedgeGuard mezzanine safety gate system, which has two gates, one of which is always closed. The inside gate is closed when pallets are being handled by a forklift, prevented personnel from falling. When raised personnel open the inside gate to access the pallet, the opposite gate closes.
Cooper Crouse-Hinds (Syracuse, NY) has developed a photovoltaic module kit equipped with a battery backup in addition to solar power kits. The solar power modules increase productivity in remote areas by eliminating the labor and materials required to run power to remote locations, or frequently change batteries.
WIKA (Lawrenceville, GA) introduces the WIKA TRONIC D-10 and C-10 pressure transmitters for industrial applications. The D-10 line is designed to enable communication with a PC over the digital output, and is particularly useful in automation engineering, laboratories, or maintenance shops.
Diamond Phoenix (Lewiston, ME) offers facility analysis, simulations, and a complete range of conveyor options, controls, and software that can improve an organization’s operational performance. Utilizing a variety of conveyor types, Diamond Phoenix can create individual solutions that fit unique organizational needs.
Dispense Works (McHenry, IL) has designed its Axis series automated filling systems, useful to fill grease or pastes into cavities and onto components with accurate and repeatable volumes. The system is self-contained, requiring no PC for operation, and is controlled through a menu-drive LCD interface, which requires no programming experience.
Advanced Machine & Engineering (AME, Rockford, IL) has produced its Amlock Hydraulic Series RCH rod clamp, developed to provide power-off clamping of rods and shafts. The clamps are actuated by a spring/collet mechanism and unclamped by hydraulic pressure, and are designed to apply to standard heavy-duty HFPA-style MF1 cylinders.
Blackmer (Grand Rapids, MI) has developed a 3-inch configuration for its piston air valves, to be used on its TX/TXD series of sliding vane pumps. In addition, the new 3-inch valve has now become the standard option for its TX/TXD pumps, replacing the diaphragm air valve.