Atlas Copco (Westfield, MA) announces the introduction of its redesigned oil-injected screw compressor range, the GA 5-11/GA 5-15 kW Variable Speed Drive (VSD). The new edition features an eight percent increase in free air delivery while keeping noise levels as low as 60 decibels.
The Tite-Space BST AGV Tugger from Creform Corporation (Greer, SC) is well suited for delivering to line-side assembly points when space is at a premium. With a minimum turning radius of 400mm, the Tite-Space slips easily into tight spots. Additional features include: A low-profile, sleek design with drive motor, 24 Volt DC power supply, and guidance sensors.
Racine Vortex (Racine, WI) has released the RNS Series (Insertion) and RWS Series (Wafter) Vortex Steam Flow Meters, which are suitable for measuring non-condensing steam and saturated process stem and pressures up to 150 psi. Both meters have no moving parts and feature the HART communication protocol for ease of field programming and system integration.
From Hydro Systems (Cincinnati, OH) comes the Hydro ICS Touchless Cleaning System for use as a part of a facility’s daily cleaning regimen. The system can reduce energy consumption, water usage, and chemical consumption in addition to helping a facility meet GS-42 or LEED compliance.
TURCK (Minneapolis, MN) has announced a new line of Kübler robust magnetic linear encoders. The T8.LI20 and T8.LI50 are available with either a push-pull output or an RS422 interface and provide a voltage range from 4.8 to 30 VDC. The linear encoders are used with magnetic bands that are attached to the mounting surface and are protected by a stainless-steel cover.
Hi-Tec announces the release of the Sidewinderbarrier, which adds a vinyl wall of protection at sensitive points in the factory or other strategic locations. The 6” x 6” Sidewinderbarrier tower is bolted to the floor, and when needed, one can pull the vinyl panel to a distance of 12 to 18 feet.
The EasyMark 5-in-1 Tooling Kit from Mate Precision Tooling (Anoka, MN) is a thick turret application tooling system for machines with a bottom stroke forming feature. The system can be set up to automatically perform any of the following five marking applications: Write numbers, dates, and other important information — no penetration or metal removal is involved.
The TS8 Disconnect Module from the Rittal Corporation (Urbana, OH) turns any single door TS8 modular freestanding industrial enclosure into a flange-mount disconnect enclosure. The module installs in place of a standard TS8 sidewall and interlocks with the enclosure door to function as any conventional disconnect door would.
iKey (Austin, TX) introduces the DT-102-SS industrial keyboard, a rugged touchpad keyboard manufactured from stainless steel. The keyboard has been designed to meet NEMA 4X and IP68 specifications, allowing it to withstand rain, snow, splashing water, hose-directed water, and even dogs .
Reed Manufacturing Co . (Erie, PA) offers an easy-to-grip Spring-Loaded Tubing Cutter. The spring-loaded cutter wheel self-feeds with constant pressure as the tool is rotated around the tubing, which means operators only have to turn the cutter in the direction of the marked arrow.
Farr Air Pollution Control (APC, Jonesboro, AR) introduces an updated portable dust and fume collector that combines three-stage filtration with versatility. The Zephyr® III collector comes with a choice of three main filters, and is ideal for welding fumes, grinding dusts, or soldering fumes.
The FL3100H UV/IR and FL3101H UV Flame Detectors from General Monitors (Lake Forest, CA) are now compatible with the HART communication protocol. The flame detectors are designed to detect fires over a wide field of view and provide alarm outputs directly. The FL3100H uses both the ultraviolet (UV) and infrared (IR) spectral ranges, making it resistant to false alarms caused by lightning or arc welding.
MTU Onsite Energy (Mankato, MN) has developed a new MTU diesel-powered generator set, covering a range of 250 to 3,250 kW. The Series 1600 engine is new for MTU, and is the smallest the company produces, yet it combines reliability, high power density, and fuel efficiency.
The Traceable Light Meter Pen from Control Company (Friendswood, TX) reads from 0 to 1,860 foot-candles with a resolution of .01, and from 0 to 20,000 Lux with a resolution of 1. Tough ABS plastic housing, an O-ring seal, and membrane keypad help keep dirt and dust out, which makes the product ideal in harsh plant environments.
Flamesafe Workwear (Caulfield, Victoria, Australia) has released the Flamesafe Maxisoft FR Cotton apparel range, which includes undergarments, polo shirts, T-shirts, sweatshirts, hoods, gloves, jackets, and more. All products meet and exceed international safety performance standards, according to the company.
ProSoft Technology (Bakersfield, CA) has announced the release of the RadioLinx Intelligent Cellular solution, designed to provide global wireless connectivity for industrial devices. The RadioLinx gateways utilize the existing cellular infrastructure to connect devices across geographically diverse locations, and can connect devices through the Internet.
The Style 177 QuickVic Flexible Coupling from Victaulic (Easton, PA) offers a flame-free pipe joining solution that reduces installation time and cost. The new coupling is an extension of the patented installation-ready line, and with no loose parts and no requirement to disassemble before installation, this line provides a competitive edge.
The B-Series Belt Skimmer line from Zebra Skimmers Corp. (Cleveland, OH) has been expanded to include a wider belt for heavier oil load applications for customers with large surface area sumps or central tank applications. Additional features include: A rugged, heavy-duty steel construction.
Athena Controls, Inc. (Plymouth Meeting, PA) has announced the availability of their new line of Foundation series of customizable modular control products. The Foundation series offers virtually limitless heat and/or cool control possibilities in a small package. The basic control board can handle everything from simple multi-loop PID control to more complex custom “state machine” control using a large flash code and RAM memory.
Master Bond (Hackensack, NJ) has developed the EP46HT-1, which extends the limits of epoxy adhesive/sealant formulations, according to the company. It can operate in temperatures from -100°F to 550°F and intermittent exposures up to 600°F. In addition, the epoxy has been designed to withstand repeated thermal cycling.