R&M Materials Handling, Inc. (Springfield, OH) has added the HoistMonitor to the option list of its RX and QX Quick Delivery offerings, which adds functionality to supervise and record key data that allows for more efficient planning and scheduling of predictive maintenance, inspections, and repairs.
Master Bond (Hackensack, NJ) has created a two-component, room temperature-curing potting and encapsulation silicone, the MasterSil 151 Med, to withstand exposure to the vibration, impact, shock, and thermal cycling often required from medical devices. With a low viscosity of 1,500 cps, the 151 silicone is ideal for use in applications with complicated contours, according to the company.
Hobart Brothers (Chicago, IL) are offering their Fabshield XLR-8 self-shielded flux-cored wire, which excels in structural steel construction with high deposition rates and good impact strengths. The XLR-8 wire is formulated to have low diffusible hydrogen levels—less than 6.
Miller Electric Mfg. Co. (Appleton, WI) introduces the Spectrum 875, a compact plasma cutter in the 60-amp category, weighing in at just 52 lbs. and with dimensions of 13.75” by 8.5” by 18”, no more than a lunch box. Despite the compact size, the 875 offers a cut rating of 7/8” on mild steel at 10” per minute (ipm).
The SafeHold EPL Series Permanent Lifting Magnets from Eriez (Erie, PA) help lift and transfer steel or iron without slings, hooks, or cables, and without marring the surface. The lifting magnets require fewer operators and helpers, and when properly installed, provide greater safety than traditional material handling devices.
The MagTab from Strong Hand Tools (Pico Rivera, CA) is designed to hold tabs in place before tack welding. The magnetic, adjustable V-shaped base of the MagTab allows the tool to securely hold against round, square, or angled surfaces, allowing any small metal part to be held in place.
Goff’s Enterprises (Pewaukee, WI) have designed a portable Weld/Grind Cell that features Goff’s weld/spark resistant curtain material, made for demanding industrial environments. The cell is ideal for a welding or grinding process that has just been added to the production line, or when your welding needs must be portable.
The TruMark 5020, a new fiber laser marker from TRUMPF (Farmington, CT), is ideal for applications on metals and plastics with high speed and excellent edge quality requirements. The 5020’s dynamic scanner module is able to convert pulse frequencies of up to 1 MHz into a correspondingly high processing speed.
Hougen Manufacturing (Flint, MI) has launched a new line of portable magnetic drills, upgrading the long-standing HMD914 with a lightweight body and an ergonomic handle. In addition, the HMD914S features a swivel base drill-to-magnet coupling that provides versatility and precise positioning, which makes it ideal for challenging fabrication or jobs involving horizontal or overhead drilling.
Motoman’s (Dayton, OH) new 6-axis MA1400 “Master Arc” welding robot significantly increases uptime by integrating the torch into the upper arm, and is available in floor-, wall-, or ceiling-mounted configurations. The MA1400 is ideal for high-density layouts with multiple robots working in close proximity due to its integrated cabling, which reduces interference and cable wear.
Koike Aronson/Ransome, Inc. (Arcade, NY) introduces the KOIKEJET waterjet cutting system, which features a precision ground ball screw drive for a smooth and accurate cutting motion, as well as laser alignment, initial height sensing, and adjustable water level control for improved cutting efficiency.
The non-sparking, non-magnetic Hand Tools from CS Unitec (Norwalk, CT) are manufactured from aluminum-bronze or copper-beryllium and meet ATEX regulations for safe use in areas where hazardous, flammable, or combustible vapors, liquids, dusts, or residues may be present.
TURCK (Minnapolis, MN) announces new A-Size 3 and 4-pin 7/8 16UN powerfast connectors that provide up to 600 volts and 15 amps of power, providing a modular wiring system designed to handle high current applications. The cordsets are available with a tray rated, exposed run PVC flexlife cable, with or without STOOW rating, and 14 AWG wires that allow for replacing hard wiring with a robust, quick disconnect system that saves time and money.
FEIN Power Tools (Pittsburgh, PA) has recently launched its new line of WS 14 compact angle grinder, including a feature called TipStar, which offers a switchless power option. The range of WS 14 range grinders covers the 5” to 6” grinding bandwidth. The WSG 14-70 E can be easily adjusted between 2,500 rpm and 7,000 rpm.
Birchwood Casey (Eden Prairie, MN) now offers a full line of aqueous and solvent-based inhibitors and sealants to prevent rust and corrosion on metal surfaces. The solvent-based inhibitors offer 50 to 300 hours of salt spray protection, making it ideal for raw steel/casting inventory, in-process parts, or parts in long-term storage.
The FLEX-BACK Panel by APS Resource (Mequon, WI) helps eliminate bottom door panel damage from forklifts by flexing upon impact and returning to its normal operating position. The FLEX-BACK panel is constructed of a high-impact polymer skin and flexible tube frame, which provides the strength to eliminate damage to bottom door panels.
The CAN-GUN1 from SafeWorld (Ashland, OR) is a new spray can tool that features the FullGrip trigger. The CAN-GUN1 has earned a 97 percent approval rating from National Street Machine Club members and a 99 percent approval rating from the Handyman Club of America, making it the only spray can handle to ever receive the “Handyman Member-Tested Seal of Approval.
The CAN-GUN1 from SafeWorld (Ashland, OR) is a new spray can tool that features the FullGrip trigger. The CAN-GUN1 has earned a 97 percent approval rating from National Street Machine Club members and a 99 percent approval rating from the Handyman Club of America , making it the only spray can handle to ever receive the “Handyman Member-Tested Seal of Approval.
Motorola Inc. (Holtsville, NY) announces the release of the MC9500, an industrial-class handheld device that brings mobile computing and new features like modular 3.5G WAN to the industrial facility. The MC9500 features a Marvell Xcale PXA320@806 MHz processor running Microsoft Windows Mobile 6.
Rockwell Automation (Anaheim, CA) has announced a series of products and enhancements to provide closed- and open-loop drive control on EtherNet/IP with Integrated Motion. Users can now control the Allen-Bradley Kinetics 6500 servo drive and PowerFlex 755 AC drive on EtherNet/IP using Common Industrial Protocol (CIP) and CIP Sync technology, in addition to the RSLogix 5000 software.