Emerson Process Management (Austin, TX) has developed its DeltaV digital automation system, designed to integrate machinery protection and prediction of critical mechanical equipment. Emerson’s integrated protection and prediction solution, a key component of the PlantWeb digital plant architecture, easily connects to the DeltaV system from AMS Suite predictive maintenance software and the CSI 6500 Machinery Health Monitor.
Aptos Industries Inc. is introducing a new model of the Rolls Up Door Guard to supplement the RUDG1, which fits doors with minimum dimensions of 10’ x 14’. The new model—the RUDG2—fit smaller doors, down to a height of only eight feet. The RUDG2 has a collision prevention device and can be installed in less than an hour.
This practical book from Industrial Press , titled “Manual of Piping Practice,” offers coverage of piping practices and maintenance. Written by a 35-year professional with hands-on knowledge and experience in pipeline building and maintenance, this book is designed to be kept at the ready on the shop floor.
Loctite 2047 is a new high lubricity threadlocker from Henkel Corportation (Rocky Hill, CT), and has been designed to ensure maximum performance on fasteners greater than 7/8” in diameter. 2047 works both as a lubricant that reduces friction, and as an adhesive/sealant that eliminates loosening, maintains clamp load, and prevents corrosion.
Industrial Magnetics, Inc. (Boyne City, MI) has added the HDR3045 heavy-duty magnetic retriever to its line of products. The HDR3045 has been designed for retrieving broken drill bits from oil or water wells, but captures metal objects from any wet or dry area that requires large lifting capacity in a small package.
The automated water jet system from NLB Corp. (Wixom, MI) features five rigid lances, each with a specially-designed nozzle to deliver high-pressure water (up to 20,000 psi) to clear tubes of hardened debris. The powerful hydraulics on the ATL-5000 inserts the five lances at a rate of 39” per second.
Easyfit, Inc. (North Canton, OH) announces a new line of slip-on structural pipe fittings to build handrail systems that conform to the “barrier-free” requirements of the Americans and Disabilities Act. The fittings can be used to construct handrails that provide a smooth, contiguous gripping surface throughout the entire length of the installation.
Steam Jenny (Somerset, PA), a division of Jenny Products Inc., has introduced four new models of belt-drive cold pressure washers, which provide a longer pump life than direct-drive units. The washers are powered by 9 or 13 horsepower Honda GX Series engines, with pressure ratings between 3,000 and 4,000 psi and flow rates between 3 and 4 gpm.
The Champ VMV LED Series from Cooper Crouse-Hinds (Syracuse, NY) provides the same reliability of a traditional Champ luminaire, combined with the improved energy efficiency and long life of LED technology. Improved temperature ratings and enhanced visibility with full spectrum lighting provide a safer work environment in hazardous and industrial locations.
The Thermocouple Mini-Grabbers from Electronic Development Labs (EDL, Danville, VA) provide a continuous thermocouple connection from bare wires to the measuring instrument without the need to attach plugs. The continuous thermocouple material, from trip to mini plug, offers a better and more convenient connection when compared to copper wire, according to the company.
EZ-Red (Deposit on the Delaware, NY) has introduces a magnetic clip accessory for the Extreme Light XL3000—the XL3000MAG. The clip features strong neodymium magnets covered with durable, non-scratch rubber. Using the magnetic clip, the XL3000 will attach to any steel surface for more versatility.
Coilhouse Pneumatics (East Brunswick, NJ) has released the Typhoon blow gun line makes blow-off and clean 132oup easy. The new OSHA-compliant tips are designed specifically for the Typhoon and include: A pinpoint tip for a precise air stream to clean crevices.
The Magnalight.com website from Larson Electronics (Kemp, TX) has added to its range of explosion-proof and general area LED lighting with a series smaller than a quarter. The LEDSM30 and LEDSM30MW draw only 30mA and operate on 12 volts DC, and are waterproof, dustproof, and US Coast Guard-certified ignition proof.
Omron Electronics LLC (Schaumburg, IL) has introduced its compact Trajexia motion controller module that integrates into CJ-Series PLCs to handle complex motion tasks for up to 30 serves or inverters. The module is fully compatible with a variety of processors (CJ1M, CJ1G, and CJ1H), and advanced programmable automation controllers.
The Model 590 Micro-Pneumatic Cutter from Xuron (Saco, ME) is an air-operated flush cutter that can be supplied with three different cutting heads: standard, standard with a lead retainer, and low-profile for reaching into densely populated PC boards. The tapered rectangular shape fits comfortably in small or large hands for the repetitive cutting of up to 16 AWG wire.
The T300 and B300 infrared cameras from FLIR Systems (Billerica, MA) are able to capture detailed images and video with a 320 x 240 focal plane array (FPA) detector (76,800 pixels). The T300 features a 2 percent thermal accuracy, 30Hz frame rate, <0.05ºC thermal sensitivity with a temperature range of -20ºC to 650ºC, and an optional range up to 1200ºC.
BEI Industrial Encoders has introduced the Omnicoder, an incremental encoder that allows users to easily program the resolution anywhere between 1 and 10,000 counts per turn. Users can produce a wide range of resolutions from one encoder and can be reprogrammed to change the resolution through an M18-to-USB programming cable.
The MacSTANDARD line of linear actuators and belt drives from Macron Dynamics (Croydon, PA) are designed to provide “off-the-shelf” components suitable for industrial linear motion, robotics, and automation applications. The actuators are available in travel lengths from 184 to 2,242mm with maximum speeds of 1,270 mm/sec to 15,240 mm/sec.
The Model 1640 from Detcon (The Woodlands, TX) is a newly designed gas detection alarm and control with a microprocessor-based control card to supervise and display the condition of 16 field-mounted gas detection sensors with either 4-20mA or serial RS-485 output. A backlit display provides indication of gas type and current reading in normal operation.
The Mini-Hermet from SOR (Lenexa, KS) is a robust pressure switch for field-mounting with a hermetically-sealed, explosion-proof steel housing. In addition, the set point can be adjusted without declassification of the hazardous area. The switch is ideal for hazardous locations where stainless steel exterior parts are required and where space is limited, notably offshore platforms or lube oil systems.