Advertisement
Product Releases
Subscribe to IMPO Magazine Product Releases

Thermocoupling Made Easy

October 26, 2009 5:32 am

The Thermocouple Mini-Grabbers from Electronic Development Labs (EDL, Danville, VA) provide a continuous thermocouple connection from bare wires to the measuring instrument without the need to attach plugs. The continuous thermocouple material, from trip to mini plug, offers a better and more convenient connection when compared to copper wire, according to the company.

TOPICS:

Bring Your Light Anywhere

October 23, 2009 9:47 am

EZ-Red (Deposit on the Delaware, NY) has introduces a magnetic clip accessory for the Extreme Light XL3000—the XL3000MAG. The clip features strong neodymium magnets covered with durable, non-scratch rubber. Using the magnetic clip, the XL3000 will attach to any steel surface for more versatility.

TOPICS:

Multi-Tipped Blow Gun

October 23, 2009 9:47 am

Coilhouse Pneumatics (East Brunswick, NJ) has released the Typhoon blow gun line makes blow-off and clean 132oup easy. The new OSHA-compliant tips are designed specifically for the Typhoon and include: A pinpoint tip for a precise air stream to clean crevices.

TOPICS:
Advertisement

Mini-LEDs

October 23, 2009 9:46 am

The Magnalight.com website from Larson Electronics (Kemp, TX) has added to its range of explosion-proof and general area LED lighting with a series smaller than a quarter. The LEDSM30 and LEDSM30MW draw only 30mA and operate on 12 volts DC, and are waterproof, dustproof, and US Coast Guard-certified ignition proof.

TOPICS:

Nothing Is Too Complex

October 23, 2009 9:45 am

Omron Electronics LLC (Schaumburg, IL) has introduced its compact Trajexia motion controller module that integrates into CJ-Series PLCs to handle complex motion tasks for up to 30 serves or inverters. The module is fully compatible with a variety of processors (CJ1M, CJ1G, and CJ1H), and advanced programmable automation controllers.

TOPICS:

Circuit Board Cutter

October 22, 2009 10:54 am

The Model 590 Micro-Pneumatic Cutter from Xuron (Saco, ME) is an air-operated flush cutter that can be supplied with three different cutting heads: standard, standard with a lead retainer, and low-profile for reaching into densely populated PC boards. The tapered rectangular shape fits comfortably in small or large hands for the repetitive cutting of up to 16 AWG wire.

TOPICS:

Doesn't Mind The Cold

October 22, 2009 10:54 am

The T300 and B300 infrared cameras from FLIR Systems (Billerica, MA) are able to capture detailed images and video with a 320 x 240 focal plane array (FPA) detector (76,800 pixels). The T300 features a 2 percent thermal accuracy, 30Hz frame rate, <0.05ºC thermal sensitivity with a temperature range of -20ºC to 650ºC, and an optional range up to 1200ºC.

TOPICS:

Programmable Encoders

October 22, 2009 10:53 am IMPO

BEI Industrial Encoders has introduced the Omnicoder, an incremental encoder that allows users to easily program the resolution anywhere between 1 and 10,000 counts per turn. Users can produce a wide range of resolutions from one encoder and can be reprogrammed to change the resolution through an M18-to-USB programming cable.

TOPICS:
Advertisement

Linear Actuators And Belts

October 22, 2009 10:51 am

The MacSTANDARD line of linear actuators and belt drives from Macron Dynamics (Croydon, PA) are designed to provide “off-the-shelf” components suitable for industrial linear motion, robotics, and automation applications. The actuators are available in travel lengths from 184 to 2,242mm with maximum speeds of 1,270 mm/sec to 15,240 mm/sec.

TOPICS:

Big Brother Of Gas Detection

October 20, 2009 11:13 am

The Model 1640 from Detcon (The Woodlands, TX) is a newly designed gas detection alarm and control with a microprocessor-based control card to supervise and display the condition of 16 field-mounted gas detection sensors with either 4-20mA or serial RS-485 output. A backlit display provides indication of gas type and current reading in normal operation.

TOPICS:

Let The Pressure Get To You

October 20, 2009 11:11 am

The Mini-Hermet from SOR (Lenexa, KS) is a robust pressure switch for field-mounting with a hermetically-sealed, explosion-proof steel housing. In addition, the set point can be adjusted without declassification of the hazardous area. The switch is ideal for hazardous locations where stainless steel exterior parts are required and where space is limited, notably offshore platforms or lube oil systems.

TOPICS:

Environmentally-Friendly Baths

October 20, 2009 11:11 am

The Duro-Tank Stainless Steel Recirculating System from A.W.T. (Chicago, IL) has been designed for use with a washout sink and uses biodegradable chemistry to clean a variety of objects. The closed-loop recirculating system uses multistage filtering to reduce chemical consumption by as much as 80 percent.

TOPICS:

Whisper-Quiet Compressors

October 20, 2009 11:09 am

Atlas Copco (Westfield, MA) announces the introduction of its redesigned oil-injected screw compressor range, the GA 5-11/GA 5-15 kW Variable Speed Drive (VSD). The new edition features an eight percent increase in free air delivery while keeping noise levels as low as 60 decibels.

TOPICS:

Lifting In Tight Spaces

October 19, 2009 11:01 am

The Tite-Space BST AGV Tugger from Creform Corporation (Greer, SC) is well suited for delivering to line-side assembly points when space is at a premium. With a minimum turning radius of 400mm, the Tite-Space slips easily into tight spots. Additional features include: A low-profile, sleek design with drive motor, 24 Volt DC power supply, and guidance sensors.

TOPICS:

Tough Flowmeters

October 19, 2009 11:01 am

Racine Vortex (Racine, WI) has released the RNS Series (Insertion) and RWS Series (Wafter) Vortex Steam Flow Meters, which are suitable for measuring non-condensing steam and saturated process stem and pressures up to 150 psi. Both meters have no moving parts and feature the HART communication protocol for ease of field programming and system integration.

TOPICS:

LEED Compliance, One Mop At A Time

October 19, 2009 11:00 am

From Hydro Systems (Cincinnati, OH) comes the Hydro ICS Touchless Cleaning System for use as a part of a facility’s daily cleaning regimen. The system can reduce energy consumption, water usage, and chemical consumption in addition to helping a facility meet GS-42 or LEED compliance.

TOPICS:

Weatherproof Encoding

October 19, 2009 10:58 am IMPO

TURCK (Minneapolis, MN) has announced a new line of Kübler robust magnetic linear encoders. The T8.LI20 and T8.LI50 are available with either a push-pull output or an RS422 interface and provide a voltage range from 4.8 to 30 VDC. The linear encoders are used with magnetic bands that are attached to the mounting surface and are protected by a stainless-steel cover.

TOPICS:

Vinyl Is Better

October 16, 2009 11:36 am

Hi-Tec announces the release of the Sidewinderbarrier, which adds a vinyl wall of protection at sensitive points in the factory or other strategic locations. The 6” x 6” Sidewinderbarrier tower is bolted to the floor, and when needed, one can pull the vinyl panel to a distance of 12 to 18 feet.

TOPICS:

5-In-1 Industrial Marking

October 16, 2009 11:35 am

The EasyMark 5-in-1 Tooling Kit from Mate Precision Tooling (Anoka, MN) is a thick turret application tooling system for machines with a bottom stroke forming feature. The system can be set up to automatically perform any of the following five marking applications: Write numbers, dates, and other important information — no penetration or metal removal is involved.

TOPICS:

Buck Tradition, Go Flange-Mount

October 16, 2009 11:35 am

The TS8 Disconnect Module from the Rittal Corporation (Urbana, OH) turns any single door TS8 modular freestanding industrial enclosure into a flange-mount disconnect enclosure. The module installs in place of a standard TS8 sidewall and interlocks with the enclosure door to function as any conventional disconnect door would.

TOPICS:

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading