Omron (Fremont, CA) introduces the G9SX-LM Low-speed Safety Monitoring Unit, which consists of two proximity sensors and a G9SX safety controller with fault diagnostics, to monitor motor rotation speed and facilitate safe machine maintenance. The G9SX-LM allows an operator to access the machine for maintenance work while it is running at a safe, maximum threshold of 10 Hz.
EXAIR’s (Cincinnati, OH) new Large Super Air Nozzle has been engineered to maximize entrained airflow and force while reducing compressed air use and noise. The design directs air to a single point of convergence, delivering 23 pounds of blowing force when mounted 12” from the target.
The Hybrid Systems from Shure (Washington, MO) can be customized to numerous configurations according to customer specification, with increased under-bench storage, making them ideal for an existing facility in need of remodeling. The workbench systems are offered in 4’, 5’, 6’, 8’, and 10’ lengths to accommodate different configurations.
Blackmer (Grand Rapids, MI) announces that its XLW Series of sliding vane pumps have been designed to handle liquids with suspended particles up to 250 microns and 25 percent concentrations, such as oxide primers, inks, paints, and adhesives. With hardened ductile iron materials, the XLW pumps can easily handle a variety of abrasive fluids when outfitted with O-rings, mechanical seals, relief valves, springs, and rotors.
The HurtSpot magnetic body-diagram whiteboard from Magnatag (Macedon, NY) shows the places of common injuries and provides a visual representation of the number of injuries better than regular reports, according to the company. By identifying the parts of the body where injuries occur, along with the number of occurrences, the HurtSpot can call attention to accident patterns, making workers more aware and careful.
Allegro Industries (Garden Grove, CA) now offers a variety of ergonomic supports to prevent back injury, carpal tunnel syndrome, and other joint and muscular stresses. Allegro addresses the serious problem of Carpal Tunnel Syndrome (CTS) with six different wrist supports, with one designed to help maintain a neutral position at he wrist while allowing full movement of the hand and fingers.
The Series 4600 2-way pilot operated diaphragm solenoid valves from Spartan Scientific (Boardman, OH) are now offered with an adjustable metering handle to restrict or manually shut off media flow. In addition, the media and pilot can be separated to extend the life of the valve by keeping corrosive material out of the pilot section.
Sioux Corporation (Beresford, SD) has introduced the new E-Series All-Electric line of pressure washers and steam cleaner, with a compact, portable, and 100 percent all-electric design. According to the company, the E-Series is ideal for cleaning, disinfecting, material handling equipment, and more, in a variety of industrial applications.
The Vibro-Curb from the Thybar Corporation (Addition, IL) has integral vibration-dampening spring isolators for mounting with rooftop HVAC units, allowing roofing to be completed after HVAC installation without disturbing the unit. In addition, the 9” counter-flashing provides a weather seal while permitting easy access to the isolators, which provide a minimum of 90 percent isolation efficiency.
The Filtered Diffuser from Comfort First Products (Santa Ana, CA) is designed to eliminate drafts from overhead diffusers and reduce the illness and allergies caused by ductwork pollution. The diffuser allows users to adjust the angle the air enters the room on all four sides, helping to eliminate drafts or hot and cold spots.
A new line of continuous-flex, interconnect motor cables are now available from igus (East Providence, RI), harnessed in accordance with leading manufacturers, including Siemens, Rexroth, Fanuc, and Allen Bradley. These interconnects are ideal for continuous-flexing applications in an Energy Chain cable carrier.
Victaulic (Easton, PA) announces the extension of its line of Advanced Groove System (AGS) couplings for faster and easier installation of large-diameter piping systems. Rigid and flexible couplers with AGS technology are now available in sizes up to 60” in diameter.
Stafford (North Reading, MA) has developed the Grip & Go Handle, which is designed to replace a standard socket cap screw in a one-, two-piece, or hinged shaft collar to permit wrench-free adjustment without sacrificing holding power. The handle features a knurled surface for simple hand-tightening, and is ideal for any non-rotary application requiring frequent repositioning along a shaft.
MAG (Sterling Heights, MI) now offers a wide range of CYCLO CUT cutting tools and CYCLO COOL metalworking fluids designed and blended for machining. The tools and fluids can increase material removal rates in titanium structures by as much as 300 percent, according to the company, resulting in faster cycle times, 33 percent cost-per-part reductions, and increased tool life.
The Enviro checkweigher bench scales from Hardy Instruments (San Diego, CA) meet the needs of food and chemical manufacturers for sanitary electronics that withstand high-pressure, high-temperature washdown environments. The Enviro is made out of 304 stainless steel and features an IP69K-rated instrument, making it easy to clean and sanitize.
GE Intelligent Platorms (Charlottesville, VA) has announced the CT12 6U CompactPCI single board computer, based on the latest 2.53 GHz Intel Core i7 processor technology. The new Intel chip is designed to deliver high performance with low power consumption and heat dissipation, and is future-proof, allowing for further processor upgrades as new chips become available.
The compact Tool Box Kneeler from Bennette Design Group and ErgoPads (Millis, MA) is made of soft, but supportive foam, and helps increase comfort for employees who have to work on their knees. The Kneeler also fits inside most toolboxes, allowing for easy transport and storage, and is made from a black, rugged “closed cell” foam that hides stains and dirt.
The Tensioner, a ready-to-mount tension mechanism from Misumi USA (Schaumburg, IL), helps reduce design and assembly time for end users. The product comes as a fully assembled unit, complete with slotted holes and adjustment screws for easy mounting, installation, and tension control.
Lee Spring (Brooklyn, NY) introduces LeeP Plastic Composite Springs, which combine the strength of metal with the special attributes of high-performing engineered thermoplastics. The springs are fabricated from distinctive formations of Ultem* PEI resins, and are stocked in a variety of standard sizes, each available in a variety of strengths.
General Machine Products Company, Inc. (GMP, Trevose, PA) announces the Heavy Duty Stiff Spine Conduit Cleaners to its line of underground cable placement tools and equipment. The cleaners are designed to remove obstructions like dirt, ash, sand, oxides, and debris from utility conduits.