Advertisement
Conveyors

F-RAT-S (Flat Right Angle Transfer)

November 6, 2014 1:47 pm | Itoh Denki | Products

F-RAT-S (Flat Right Angle Transfer) System is a drop in installation into existing MDR conveyor frames. Powered by three 24V DC Itoh Denki Motorized Rollers. Run-On-Demand feature increases energy savings over traditional transfers. No pneumatics are needed to move your product in 4 different directions. 3 motors; spine, lifting/dropping, and transfer rollers. Controlled with Itoh Denki's IBE-01 two zone control card. Transfers products up to 110lbs. (51kg); Minimum package size: 300mm x 300mm; Minimum height: 170mm; Transfer capacity: 2500/hr; Available in 4 sizes: 15" x 30", 20" x 30" and 28" x 30"

LISTED UNDER: Motor Drives | Pulleys | Conveyors

PM635FS/KE DC Motorized Driven Roller

November 6, 2014 1:07 pm | Itoh Denki | Products

Motorized Conveyor Roller for Heavy Duty Applications - the PM635FS/KE. Standard torque or High torque; 2.5" diameter; 24V long life brushless DC motor; 11 gauge carbon steel tubing; ABEC 1 bearings; low profile requirement; zinc plated die-cast end caps; heavy duty pallet handling applications. 11/16" threaded hex shaft standard. Transport product up to 2500/4000lbs. (FS/KE). Speeds up to 279/855fpm (FS/KE); Available with roller chain sprockets and poly V-Belt Drive. Sprockets welded to tube or double sprocket end cap. Easy retro fit for existing pallet handling applications. With or without spring loaded shaft. KE model 1000mm power cable standard.

LISTED UNDER: Conveyor Controls | Pulleys | Conveyors

PM486FE/FP DC Motorized Driven Roller

November 6, 2014 11:03 am | Itoh Denki | Products

One of our Best Sellers - the PM486. Available in standard torque (FE) or high torque (FP). 1.91" diameter, 24V long life brushless DC motor. Spring loaded end for quick install/removal; zinc plated carbon steel tube; ABEC 1 bearings; die-cast zinc end caps; dynamic braking standard; transports product up to 200/400 lbs (FE/FP). Speeds up to 699/973 FPM (FE/FP). 7/16" plain hex shaft standard (FE model); 7/16" threaded hex shaft standard (FP model). Many options available including low-temp, waterproof, clean room, grooved or straight tube, pulley end cap options, wide variety of lagging. DC MDRs reduce energy consumption and noise in your facility, and fit into existing conveyor frames.

LISTED UNDER: Conveyor Controls | Pulleys | Conveyors
Advertisement

Dorner’s 3200 Precision Move Conveyor Platform

November 19, 2013 8:33 am | by Dorner Manufacturing Corp. | IMPO | Product Releases | Comments

Dorner’s 3200 Precision Move low profile belt conveyor platform has received the Ultraclean Products Approval Laboratory certification for use in ISO Standard 14644-1 Class 5, and Federal Standard 209 Class 100 rated cleanrooms.

LISTED UNDER: Conveyor Belting | Conveyors

Flex Chain Conveyor -- To Spec

October 15, 2013 9:05 am | by Dorner | IMPO | Product Releases | Comments

The Dorner (Hartland, WI) flexible chain conveyor platform, the 2200 SmartFlex™, is now a standard product offering that can be engineered to exact customer specifications in minutes and available with the industries’ fastest shipping, says the company.

LISTED UNDER: Conveyors

Belt Cleaner Tips

September 20, 2013 4:46 pm | by Martin Engineering | Product Releases | Comments

Introduced in direct response to customer input, the replaceable belt cleaner tips have increased wear life in secondary cleaners by as much as 50 percent, while cutting replacement labor time roughly in half, says the company.

LISTED UNDER: Janitorial Equipment | Conveyors | Material Handling Equipment

Pneumatic Vacuum Conveyors

September 6, 2013 4:09 pm | by Hapman | IMPO | Product Releases | Comments

These pneumatic conveyors are engineered to move high volume bulk material in a short period of time without the need for plant air, says the company.

LISTED UNDER: Conveyors | Material Handling Equipment | Filters

Industrial Lubricants, Cleaners

August 29, 2013 4:24 pm | by Rust-Oleum | IMPO | Product Releases | Comments

The cleaning products include a Heavy Duty Cleaner, Degreaser, and Brake Cleaner and are effective at removing contaminants such as soil, grime, grease, diesel, adhesive gum, and more.

LISTED UNDER: Lubricants | Chemicals | Cleaning Solvents
Advertisement

Transport System LT40

August 29, 2013 4:21 pm | by Montech AG | IMPO | Product Releases | Comments

The drive, with 60 mm diameter, is integrated in the shaft, with no protruding parts, and operates the LT40 conveyors almost noiselessly, says the company.

LISTED UNDER: Conveyors | Material Handling Equipment | Conveyors

DTools Online

June 21, 2013 4:00 pm | by Dorner Tools | IMPO | Product Releases | Comments

The online site that’s home to Dorner’s conveyor productivity applications is now optimized for use with tablet computers, giving customers even more access to the design tools to  configure their belt conveyor systems.

LISTED UNDER: Software | Conveyors | Conveyors

Certified Inductive Sensors

June 21, 2013 3:40 pm | by Steute Xtreme | IMPO | Product Releases | Comments

A new line of ATEX- IECEx Certified Inductive Sensors has been designed for use in Zone 0 and 20 explosive atmospheres and extreme environments.

LISTED UNDER: Sensors | Conveyors

E2 Micro Chain

June 21, 2013 3:36 pm | by igus® | Product Releases | Comments

New design features, such as a new double-stop dog system, make the latest E2 Micro chain even sturdier and quieter than its predecessors, says the company.

LISTED UNDER: Conveyors | Material Handling Equipment | Cable & Hose Carriers

FAST Software Tool

June 21, 2013 3:33 pm | by Lenze Americas | Product Releases | Comments

The FAST tool provides a complete range of standard software modules for positioning, registration, cam profiling, multi-conveyor coordination, and other synchronized motion control tasks.

LISTED UNDER: Manufacturing Software | Software | Conveyors

COFE Starter Kit

May 17, 2013 11:03 am | by VARGO | IMPO | Product Releases | Comments

COFE, Continuous Order Fulfillment Enterprise, processes orders within a distribution center using a demand driven waveless approach, says the company.

LISTED UNDER: Conveyors

X65 Conveyor

March 22, 2013 4:56 pm | by FlexLink | IMPO | Product Releases | Comments

The X65 conveyor is designed for low friction, low power consumption, and a long service life.

LISTED UNDER: Conveyors

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading