Advertisement
Mechanical Power Transmission:

Dencentralized AC Drive for Outdoor Installations

December 19, 2014 4:36 pm | by Vacon | Product Releases | Comments

According to Vacon, the VACON 100 X sets a new benchmark for decentralized drive solutions.

LISTED UNDER: Drives

F-RAT-S (Flat Right Angle Transfer)

November 6, 2014 1:47 pm | Itoh Denki | Products

F-RAT-S (Flat Right Angle Transfer) System is a drop in installation into existing MDR conveyor frames. Powered by three 24V DC Itoh Denki Motorized Rollers. Run-On-Demand feature increases energy savings over traditional transfers. No pneumatics are needed to move your product in 4 different directions. 3 motors; spine, lifting/dropping, and transfer rollers. Controlled with Itoh Denki's IBE-01 two zone control card. Transfers products up to 110lbs. (51kg); Minimum package size: 300mm x 300mm; Minimum height: 170mm; Transfer capacity: 2500/hr; Available in 4 sizes: 15" x 30", 20" x 30" and 28" x 30"

LISTED UNDER: Motor Drives | Pulleys | Conveyors

PM635FS/KE DC Motorized Driven Roller

November 6, 2014 1:07 pm | Itoh Denki | Products

Motorized Conveyor Roller for Heavy Duty Applications - the PM635FS/KE. Standard torque or High torque; 2.5" diameter; 24V long life brushless DC motor; 11 gauge carbon steel tubing; ABEC 1 bearings; low profile requirement; zinc plated die-cast end caps; heavy duty pallet handling applications. 11/16" threaded hex shaft standard. Transport product up to 2500/4000lbs. (FS/KE). Speeds up to 279/855fpm (FS/KE); Available with roller chain sprockets and poly V-Belt Drive. Sprockets welded to tube or double sprocket end cap. Easy retro fit for existing pallet handling applications. With or without spring loaded shaft. KE model 1000mm power cable standard.

LISTED UNDER: Conveyor Controls | Pulleys | Conveyors
Advertisement

PM486FE/FP DC Motorized Driven Roller

November 6, 2014 11:03 am | Itoh Denki | Products

One of our Best Sellers - the PM486. Available in standard torque (FE) or high torque (FP). 1.91" diameter, 24V long life brushless DC motor. Spring loaded end for quick install/removal; zinc plated carbon steel tube; ABEC 1 bearings; die-cast zinc end caps; dynamic braking standard; transports product up to 200/400 lbs (FE/FP). Speeds up to 699/973 FPM (FE/FP). 7/16" plain hex shaft standard (FE model); 7/16" threaded hex shaft standard (FP model). Many options available including low-temp, waterproof, clean room, grooved or straight tube, pulley end cap options, wide variety of lagging. DC MDRs reduce energy consumption and noise in your facility, and fit into existing conveyor frames.

LISTED UNDER: Conveyor Controls | Pulleys | Conveyors

Variable Speed Drive

August 25, 2014 12:43 pm | by WEG Electric | Product Releases | Comments

WEG Electric introduces its new CFW100 Mini Drive with advanced technology features in a small package. 

LISTED UNDER: Drives | Motor Drives

Electric Motors With Shaft Ground Brush

May 16, 2014 9:52 am | by Baldor Electric Company | Product Releases | Comments

The new Super-E Motor with Baldor Shaft Grounding Brush is designed with a carbon brush mounted internally to divert shaft currents away from motor bearings, thus increasing the life of the bearings.

LISTED UNDER: Motor Drives

High-Force Ironcore Linear Motor

January 13, 2014 7:55 am | by ETEL S.A. | Product Releases | Comments

ETEL is proud to introduce the latest in linear motor technology, the LMS ironcore linear motor series. Boasting a patented anti-cogging design, these linear motors offer a significant advantage for thermal-drift-sensitive precision machines, and are the perfect solution for many demanding motion control applications.

LISTED UNDER: Motor Drives

Medium Voltage AC Drives

October 4, 2013 12:46 pm | by Yaskawa America | IMPO | Product Releases | Comments

Designed for energy savings and improved process control, MV1000 drives combine compact modular design, high efficiency, low harmonics, and industry leading MTBF into a medium voltage drive solution.

LISTED UNDER: Drives | Filters
Advertisement

High Inertia Motors

August 15, 2013 5:20 pm | by Baldor Electric Company | Product Releases | Comments

The high inertia motor is specially designed to withstand the increased temperature rise during start and stall conditions, and have stall times longer than their start times, says the company.

LISTED UNDER: Motor Drives

Dodge MAXUM XTR Concentric Reducer

July 26, 2013 3:37 pm | by Baldor Electric Company | Product Releases | Comments

The MAXUM XTR’s high precision carburized and ground gearing meets AGMA Q11 Quality standards, as well as the AGMA 2301 cleanliness specification.

LISTED UNDER: Speed Reducers

Belt Drive Actuators

June 7, 2013 11:03 am | by MISUMI USA, Inc. | Product Releases | Comments

Designed to optimize performance and reliability at a modest cost, the MSA Series Actuators can be configured to carry loads up to 227 kg (500 lbs).

LISTED UNDER: Actuators | Linear Actuators

700APD Power Drive

June 7, 2013 10:37 am | by Reed | Product Releases | Comments

The 700APD Power Drive is a portable, pneumatic, heavy-duty power drive which provides power for threading pipe and conduit up to 2 inches (50 millimeters) in diameter.

LISTED UNDER: Drives | Pneumatic Power Tools

Airstroke Actuators

May 31, 2013 1:09 pm | by Firestone Industrial Products | Product Releases | Comments

Airstroke Actuators are pneumatic cylinders with hydraulic force capability and are manufactured with the latest manufacturing technology, says the company.

LISTED UNDER: Actuators
X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading