Clamp-On Meters

July 11, 2012 5:15 pm | by CAS DataLoggers | IMPO | Product Releases | Comments

Measuring TRMS voltage and current, these dataloggers are capable of measuring power in megawatt range down to 1W resolution.


E-Plex Control

March 15, 2012 4:24 pm | by Kaba Access Control | IMPO | Product Releases | Comments

E-Plex Electronic Server Cabinet Locks can be integrated with a building’s access control system.


Energy Analyzers

January 19, 2012 10:53 am | IMPO | Product Releases | Comments

The Fluke® 430 Series II Three-Phase Power Quality and Energy Analyzers from Davis Instruments (Vernon Hills, IL) help locate, predict, prevent, and troubleshoot issues in three-phase and single-power distribution systems. On each analyzer, an energy loss calculator displays losses in dollars while automatic trending ensures that every measurement is automatically recorded.

LISTED UNDER: Analyzers | Monitors

Truck-Mounted Static Ground

December 2, 2011 5:46 am | IMPO | Product Releases | Comments

A new truck-mounted static grounding system from Newson Gale (Overland Park, KS) provides an enhanced margin of safety when vacuum trucks are used during transfer of flammable or combustible materials in hazardous areas. The Earth-Rite® MGV system verifies the existence of an effective low resistance ground point and monitors the bonding connection throughout the transfer process.


Portable Multi-Gas Detector

November 2, 2011 7:53 am | IMPO | Product Releases | Comments

Industrial Safety Technologies (The Woodlands, TX), owner of Detcon and GMI, recently introduced the PS200 portable multi-gas detector. The PS200 monitors and displays up to four hazardous gas conditions simultaneously. Both lightweight and durable, it uses catalytic bead sensor technology to monitor and detect a wide range of combustible gases, and electrochemical sensor technology to monitor and detect carbon monoxide, hydrogen sulfide, and oxygen deficiency.


Redesigned CSD Compressor Series

September 26, 2011 7:43 am | IMPO | Product Releases | Comments

Kaeser Compressors (Fredericksburg, VA) has introduced the redesigned CSD rotary screw compressor series. Available in flows from 186-565 cfm (60-125hp) and pressures to 217 psi, the new CSD models offer reliability, efficiency, and easy maintenance. CSD compressors come standard with several new features including the Sigma Control 2 intelligent compressor control.


VOC-TRAQ Volatile Organic Compound Detector

August 17, 2011 12:13 pm | IMPO | Product Releases | Comments

The VOC-TRAQ total volatile organic compound (TVOC) detector from Baseline Industries (Lyons, CO) monitors and records PID detectable TVOCs using any PC with a Windows operating system. Designed for ease of use, the USB compatible VOC-TRAQ can operate while connected to a PC, or it can remotely store up to 36,000 sample readings with the detector’s internal memory using the optional rechargeable power supply.


Real-Time Hose Condition Monitoring

August 15, 2011 12:17 pm | IMPO | Product Releases | Comments

Eaton (Cleveland, OH) has introduced a new hydraulic hose technology that uses patented real-time hose condition monitoring to report imminent failure in high pressure hose assemblies. The LifeSense hose technology continuously monitors the health of hydraulic hose assemblies in a system and alerts users when an assembly approaches the end of its useful life.


Liquid Mist Flow Monitors From FilterSense

July 12, 2011 6:38 am | IMPO | Product Releases | Comments

FilterSense ’s (Beverly, MA) Liquid Mist Flow Monitors are used to monitor the outlet of all types of mist eliminators for mist carryover and mist filter failure detection. The monitors employ an induction-sensing principle and a probe to ensure high reliability even in harsh environments such as acid mist, oil mist, or water droplets in high pressure pipes.

LISTED UNDER: Filters | Monitors

Purge HVAC Or Refrigerator Lines

April 19, 2011 6:32 am | IMPO | Product Releases | Comments

TurboTorch (St. Louis, MO) has introduced a new Nitrogen Flow Meter that is ideal, according to the company, for purging HVAC or refrigerator lines prior to the brazing process. The meter monitors the flow of nitrogen gas through the lines so that oxygen can be displaced. The model NFM-TT can measure gas in two ways: standard cubic feet per hour (outflow 0 to 75 SCFH), or by liters per minute (0 to 35 LPM).


A Smarter Electric Lift Truck

April 1, 2011 7:42 am | IMPO | Product Releases | Comments

Yale Materials Handling Corporation (Greenville, NC) has unveiled its next generation of electric lift trucks with the ECR-VA series. The new trucks have lifting capacities of 3,000 to 4,000 pounds, plus AC motors and transistor controller technology for both the traction and hydraulic systems, which reduces the frequency and cost of maintenance.


Control Liquid Nitrogen

March 29, 2011 12:00 pm | IMPO | Product Releases | Comments

Union Process, Inc. (Akron, OH) has developed a system for controlling the flow of liquid nitrogen into the grinding chamber for customers performing cryogenic grinding. The system includes a probe inside the chamber that monitors the temperature and regulates the flow of liquid nitrogen into the mill at the desired temperature.


Check The Health Of Your Machines

March 17, 2011 9:52 am | IMPO | Product Releases | Comments

The new CSI 2600 Machinery Health Expert delivers the portability of the two-channel CSI 2130 Machinery Health Analyzer and advanced predictive capabilities. The system, from Emerson Process (Knoxville, TN) continuously monitors, records, and analyzes machinery information for more than 100 hours across all 24 channels without the significant cost of a hardwired solution.


Torque Wrenches Go Digital

August 30, 2010 11:09 am | IMPO | Product Releases | Comments

Mountz Inc.  introduces newest version of the TorqueMate® Digital Torque Wrench, a microprocessor-controlled digital torque wrench designed for use in quality control and maintenance. With a large LED screen, the wrench is well-suited for torque calibration, joint testing, auditing, or verification of torque applied.


Better Alignment Is Important

August 30, 2010 7:16 am | IMPO | Product Releases | Comments

The ROTALIGN ULTRA LIVE TREND is a short-term continuous monitoring application from LUDECA (Doral, FL) that determines the relative positional changes between coupled machines during run-up or shutdown. The ROTALIGN 5-axis sensor monitors both the vertical and horizontal parallel continuously, allowing the machines to be precisely aligned to reflect normal operating conditions.



You may login with either your assigned username or your e-mail address.
The password field is case sensitive.