Advertisement
Computers & Software:

CableEye® HVX HiPot Cable Tester System: Base Unit Item 829

February 27, 2015 5:06 pm | CAMI Research, Inc. | Products

Permits expanded testing for insulation resistance and dielectric breakdown. After checking for opens, shorts, miswires, and resistance limits, the HVX hipot module will apply a user-selectable voltage from 10v to 1500v DC, or 10v to 1000v RMS AC, to each connection group in the cable. Ramp Up, Ramp Down, Dwell Time (same as Test Time), Trip Current, and Trip Delay (same as Soak Time) may be programmed for your specific requirements. Current leakage detected during the high voltage test phase provides a measure of insulation resistance up to 1 GΩ, and any leakage current exceeding a preset limit reveals the presence of moisture, flux, or other contamination on exposed contacts.

LISTED UNDER: Analyzers | Electric Meters | Instruments

Light Director™ Guided Assembly System: A CableEye® Accessory

February 27, 2015 2:55 pm | CAMI Research, Inc. | Products

For assembling connectors used in aerospace, medical, and other high-reliability applications. Light fibers driven by super-bright LED lamps individually illuminate target cavities in the connector being assembled.
 • Light-Directed guided assembly • 1st-Sided Pinning and 2nd-Sided Pinning with electrical test • Increases productivity by up to 50% over manual assembly • Reduces technician fatigue • Reduces errors to near zero The Light Director™ system is an accessory for the CableEye® PC-Based cable test system. It requires a reusable mounting kit for each mating connector (see Items CB37A to CB38A), and the AutoBuild Guided Assembly Software (Item 728).

LISTED UNDER: Analyzers | Electric Meters | Instruments

CableEye® M3U Cable Tester System: Item 821U

February 27, 2015 1:30 pm | CAMI Research, Inc. | Products

For diagnostic and Pass/Fail Testing Find, display, log, document: opens, shorts, miswires, intermittent connections, continuity, contact and isolation resistance, embedded resistors and diodes. • 152 Test point base unit (for ≤76-conductor cable) • Expandable to 2560 test points (for >76-conductor cable) • Resistance measurement 0.3Ω-10MΩ • Graphical User Interface (GUI) • 9x12" bench footprint
 Includes: CB15 board set (Item 745), PC s/w, DB of >200 standard cables, 1yr warranty, 1yr free tech support, one-year free software and database upgrades. USB interface standard. If cables will never exceed 64 conductors, the M2-Basic system (Item 810) offers similar capabilities without resistance measurement at a lower cost.

LISTED UNDER: Analyzers | Electric Meters | Instruments
Advertisement

Adept SmartVision MX Vision Processor

February 4, 2015 9:51 am | by Adept Technology, Inc. | Product Releases | Comments

Adept SmartVision MX provides a way to add vision guidance and inspection to industrial robot applications.

LISTED UNDER: Controls: | Sensing Devices: | Computers & Software:

New Generation of Demag Radio Controls

December 1, 2014 10:20 am | by Terex Material Handling | Product Releases | Comments

Terex Material Handling has launched the latest generation of its Demag Remote Control (DRC) radio control system with its new D3 line of units. 

LISTED UNDER: Hand-Held Computers | Manufacturing Software | Monitors

EHS Data Collection App

July 2, 2014 10:34 am | by Kestrel Management | Product Releases | Comments

The dynaQ app enables real-time data collection at the point of discovery using tablets and smartphones. 

LISTED UNDER: Maintenance Management Software | Software

Control Machines With an App

June 24, 2014 9:18 am | by Nanospark | Product Releases | Comments

Nanospark is a machine interface controller that manages attached equipment through the simple touch screen display of an iOS app.

LISTED UNDER: Warehouse Management

Ultra-Rugged Mobile Device for Industrial Settings

June 11, 2014 9:41 am | by Two Technologies | Product Releases | Comments

The first in a series of hard-shell mobile devices designed specifically to withstand hard use in industrial environments has been developed by Two Technologies. 

LISTED UNDER: Hand-Held Computers
Advertisement

New Software for Easy Database Building

June 5, 2014 10:14 am | by AutoCrib, Inc. | Product Releases | Comments

AutoCrib, Inc. unveiled its new Guardrail software, designed to simplify and automate the laborious task of building databases for industrial vending systems. 

LISTED UNDER: Software

New Line of RFID Printers

May 12, 2014 2:39 pm | by Zebra Technologies | Product Releases | Comments

Zebra Technologies has launched the new ZT400 series printers, Zebra’s latest mid-range printer offering that will replace all ZM series printers. 

LISTED UNDER: Warehouse Management

New Product Management iPad App

January 28, 2014 8:35 am | by Thomas & Betts | Product Releases | Comments

The recent 2.0 upgrade to the T&B Mobile iPad application from Thomas & Betts (T&B) features a new tools button to retrieve literature, view videos and even scan barcodes on T&B product packaging.  

LISTED UNDER: Hand-Held Computers | Warehouse Management

Paper-Less Manufacturing Execution Software

January 10, 2014 8:39 am | by Paper-Less | Product Releases | Comments

Paper-Less MV2 advanced manufacturing execution software optimizes production operations management for increasing efficiency while reducing paper.

LISTED UNDER: Maintenance Management Software | Manufacturing Software

Web-based Enterprise Operations Solution

January 3, 2014 8:33 am | by Yokogawa Electric Corporation | Product Releases | Comments

Yokogawa Electric Corporation announces Release 10 of FAST/TOOLS® – the latest version of a web-based real-time operations management and visualization software package that brings revolutionary changes to real-time process information intelligence.

LISTED UNDER: Software

New Visual Picking Display Tool

January 2, 2014 8:54 am | by Kardex Remstar | IMPO | Product Releases | Comments

When it comes to display monitors for picking, the bigger the better. Now available from Power Pick Global software, an enhanced picking display monitor can be integrated into a picking station to increase picking accuracy and speed.

LISTED UNDER: Warehouse Management | Monitors

GPS Mobile MapSight Device

December 23, 2013 8:49 am | by General Electric | Product Releases | Comments

This revolutionary solution integrates laser, camera and GPS technologies, enabling utilities to quickly and accurately collect measurement and location data on any of their joint-use utility poles or field assets.

LISTED UNDER: Warehouse Management

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading