Advertisement

Welders In All Sizes

August 23, 2010 7:22 am | IMPO | Product Releases | Comments

ESAB Welding & Cutting Products (Florence, SC) introduces the Origo MIG family of welders — including the MIG 320, 410, and 510 — all of which offer a wide current and voltage range that simplify optimizing settings for a wide variety of filler metals and gases. Made with a strong galvanized metal casing designed to withstand harsh environments, the Origo family features large wheels, sturdy lifting eyelets, and a standard undercarriage for easy forklift transport.

LISTED UNDER: Welding Equipment

A Weld-Safe Bunker For Sensors

August 19, 2010 7:20 am | IMPO | Product Releases | Comments

Balluff ’s BunkerProx is a rugged, “self-bunkering” M18 inductive proximity sensor designed to survive longer in abusive welding applications without external protection. The BunkerProx has a strong, thick housing that boosts the ability to withstand repeated mechanical impact and serves as an intermittent heat sink to shield the sensor electronics from intense heat.

LISTED UNDER: Welding Equipment

Collect Weld Fumes

August 13, 2010 6:23 am | IMPO | Product Releases | Comments

United Air Specialists, Inc. announces the W Series of weld fume collectors, which are available in portable (WP model) and wall-mount (WS model) configurations. The collectors effectively capture weld fumes at the source of the welding process with obstruction-free extraction arms. Once inside the system, contaminants are sent through a spark trap and captured within a fire-retardant Protura Nanofiber cartridge filter.

LISTED UNDER: Welding Equipment
Advertisement

Protect Your Body Parts

August 10, 2010 6:11 am | IMPO | Product Releases | Comments

Allegro Industries (Garden Grove, CA) is offering a number of new ergonomic products for the workplace, including back supports, wrist supports, kneepads, and more. The Dual-Flex wrist supports contains eight stays that provide firm support, plus an ambidextrous design that fits both right and left hands.

LISTED UNDER: Welding Equipment

Filters Meet Nanotechnology

July 22, 2010 10:47 am | IMPO | Product Releases | Comments

The HemiPleat Nano dust collector filter from Camfil Farr Air Pollution Control (Jonesboro, AR) offers high filtration efficiencies, a longer service life, and lower pressure drop for energy savings and enhanced performance. A thick layer of nano fibers are applied to the filter to yield a MERV 14 efficiency rating.

LISTED UNDER: Welding Equipment

Hugging The Corner

June 7, 2010 7:23 am | IMPO | Product Releases | Comments

Strong Hand Tools (Pico Rivera, CA) designed the 90° Corner Magnet for holding workpeices from the outside, leaving unobstructed space inside your workpiece for welding. The boomerang-shaped magnet has a height of just 3-1/2”, making it compact enough to take anywhere in the shop.

LISTED UNDER: Welding Equipment

Get In Your Bunker

June 7, 2010 7:22 am | IMPO | Product Releases | Comments

Balluff (Florence, KY) has developed the BunderProx, a rugged, “self-bunkering” M18 inductive proximity sensor designed to survive longer in welding applications without external protection. The BunkerProx has a strong, thick housing that boosts the ability to withstand repeated mechanical impact, and also acts as an intermittent heat sink to shield the electronics from intense heat.

LISTED UNDER: Welding Equipment

Lower Your Energy Bills

June 3, 2010 9:35 am | IMPO | Product Releases | Comments

The SmartBanks from Maysteel (Menomonee Falls, WI) for Low Voltage Power Factor Correction provide energy efficiency and savings by eliminating KVA and KVAR peaks that drive up energy bills. They can be used near motors, transformers, inductive heating, and arc welding generators.

LISTED UNDER: Welding Equipment
Advertisement

Make Shaft Welding Easy

April 20, 2010 6:58 am | IMPO | Product Releases | Comments

A line of AISI 1018 steel shaft collars from Stafford Manufacturing Corp. (Wilmington, MA) can be machined to facilitate the welding of components such as brackets, cams, lever arms, mounts, pins, and rods. The collars come in one- and two-piece styles that can be further machined to make fixturing easier when creating welded assemblies.

LISTED UNDER: Welding Equipment

Strong-As-Steel Epoxy

March 18, 2010 7:20 am | IMPO | Product Releases | Comments

IMSEAL-800, a high-strength epoxy resin from IMPCO, Inc. (East Providence, RI) seals gross (visible) porosity in castings and other metal parts. It completely fills blowholes, cracks, and other defects where welding or brazing would be impractical. Other features include: A leak-proof, pressure-tight seal that can be drilled, tapped, machined, and otherwise processed without worry.

LISTED UNDER: Welding Equipment | Chemicals

Repair, Don't Scrap, Frames And Columns

March 8, 2010 6:20 am | IMPO | Product Releases | Comments

RIDG-U-RAK (North East, PA) introduces a turnkey rack repair solution for damaged frames and columns, which are designed to fit any manufacturer’s rack system. The repair kits are available in straight leg, slant back, and set-back designs. Features of the repair kits include: Heavy-duty horizontal and diagonal bracing, with a full length heavy-gauge rear channel, offering complete and rigid engagement with the rear column.

LISTED UNDER: Welding Equipment

The Pressure Of Ultrasonic Welding

February 10, 2010 7:03 am | IMPO | Product Releases | Comments

Sensor Products (Madison, NJ) is now offering Pressurex pressure-indicating sensor film, which can be used during ultrasonic welding to ensure that the horn and anvil are precisely aligned during setup. Pressurex reveals the distribution and magnitude of pressure between any two contacting surfaces, and when placed between the horn and anvil or the ultrasonic bonder, the film instantaneously and permanently changes color proportional to the pressure applied.

LISTED UNDER: Welding Equipment

Get In The Groove

January 18, 2010 9:15 am | IMPO | Product Releases | Comments

Victaulic (Easton, PA) announces the extension of its line of Advanced Groove System (AGS) couplings for faster and easier installation of large-diameter piping systems. Rigid and flexible couplers with AGS technology are now available in sizes up to 60” in diameter.

LISTED UNDER: Welding Equipment

Full-Body Nomex Harnesses

December 10, 2009 8:12 am | IMPO | Product Releases | Comments

The Thermatek Kit from MSA (Pittsburgh, PA) is a full-body harness kit for high-heat or welding applications, and features a Kevlar/Nomex-blend webbing to provide resistance against chemicals, weld splatter, and other high-heat exposures. Kevlar stitching in contrasting colors enables users to more easily inspect the product for flaws that might arise, and the shock absorber features a Tuffweld protective cover to increase the lanyard longevity.

LISTED UNDER: Welding Equipment | Chemicals

Heavy-Duty Die Grinders

December 7, 2009 6:03 am | IMPO | Product Releases | Comments

Dynabrade, Inc. (Clarence, NY) has introduced a new series of air-powered Die Grinders, which feature high-quality steel housings ideal for heavy-duty applications. The grinders are available with either 0.5 or 0.7 hp air motors, and each tool features a rubber grip housing to insulate the operator from vibration and cold air transmission.

LISTED UNDER: Welding Equipment

Pages

X
You may login with either your assigned username or your e-mail address.
The password field is case sensitive.
Loading