Articles
FREE Email Newsletter
Daily industrial news and top headlines for plant and maintenance managers
Evolving Robot Safety Standards
November 8, 2012 4:18 pm | by Eric Esson, National Sales & Marketing Manager, Frommelt Safety Products | CommentsSeveral aspects of industrial safety standards are changing and require constant monitoring and a bit of common sense to keep current. Technological advances and alternative guarding methods are being devised every day, and companies should be doing everything within their power to eliminate the opportunity. A great place to start is by conducting thorough Risk Assessments and referencing current standards and regulations.
Q & A With Bernie Anger, GE Intelligent Platforms
November 8, 2012 4:08 pm | by Mike Schmidt. Associate Editor, Manufacturing Business Technology | CommentsAs automation technology has developed over the years, workers have been forced to adapt and refine the necessary skills to utilize and maintain various systems. According to Bernie Anger, General Manager Control and Communication System for GE Intelligent Platforms, there is a shortage of individuals with the expertise necessary to accomplish these tasks and usher in the future of automation.
Adhesives: A Hidden Powerhouse
November 8, 2012 4:01 pm | by Rachel Leisemann Immel, Associate Editor, IMPO | CommentsAdhesives have revolutionized the auto industry by replacing mechanical fasteners, lowering a car’s weight, and improving fuel efficiency. The aircraft manufacturing industry has seen similar results, and adhesives today join up to 30 percent of all components in modern aircraft. For many, adhesives may not be the most noticeable part of industrial manufacturing, but they are certainly among the most important.
Welcome To The Matting Zone
November 8, 2012 3:55 pm | by John Engel, Senior Marketing Manager, Cintas Facility Services | CommentsAccording to the U.S. Department of Labor, slips, trips, and falls constitute the majority of industrial accidents. Plant managers and operators should remain aware of the devastating impact these accidents can have on the victim and the plant. While not every accident is preventable, many of the causes of slip-and-fall accidents can be offset through the implementation of a safe floor matting system.
Manufacturing Digital Revolution: Exit Clipboard, Enter iPad
November 8, 2012 3:50 pm | by Matthew Littlefield. President, LNS Research | CommentsSince users are driving demand and manufacturing software vendors continue to invest in stronger solutions, the market is expanding in terms of cross-functionality, user-friendliness, SaaS offerings, and interoperability. This time will be looked upon in history as a rapid expansion of business processing power.
Organic Milk Processor Packs A Punch
November 7, 2012 5:29 pm | by Krystal Gabert, Editor, Food Manufacturing | CommentsWhiteWave Foods’ Horizon Organic facility in City of Industry, CA, is making organic milk accessible to a larger consumer base than ever before. In fact, Horizon Organic is the fastest growing unique brand in the country. The City of Industry facility employs a continuous improvement culture to reduce downtime and bottlenecks and has improved OEE performance by up to 34 percent on some production lines.
The Reality Of IP Theft
November 7, 2012 8:38 am | by Joel Hans, Managing Editor, Manufacturing.net | CommentsVerizon has recently released its fifth annual Data Breach Investigations Report, which investigates the various ways that attackers — both internal to a company or external, both intentional and accidental — breach security systems and gain access to sensitive data. This year, Verizon’s RISK team decided to take a closer look at the data in the effort to discover trends in attacks related directly to intellectual property.
ISM: Manufacturing Continues To Grow
November 6, 2012 7:09 am | by Mike Schmidt. Associate Editor, Manufacturing Business Technology | CommentsThe October registered 51.7 percent, an increase of 0.2 percentage point from September’s reading of 51.5 percent, indicating growth in manufacturing at a slightly faster rate. “This helps to remind people that manufacturing is growing, despite its ups and downs and everything going on around us,” said Holcomb, CPSM, CPSD, chair of the Institute for Supply Management Manufacturing Business Survey Committee.
Legacy Automation Systems: Maintain Or Overhaul?
November 5, 2012 7:09 am | by Mike Schmidt, Associate Editor, Manufacturing Business Technology | CommentsThere is no shortage of reasons why manufacturers consider addressing the limitations of their legacy automation systems. From increased efficiency to widespread customization, there is obvious value in overhauling or maintaining aging equipment. Then why are manufacturers sticking with legacy systems that don’t offer the desired performance? More importantly, what are their options when they decide they are ready to make a change?
Lack of Leadership Seen To Thwart Manufacturing Renaissance
November 5, 2012 7:08 am | by Deloitte | CommentsThe public feels that American leadership is off-course in improving manufacturing competitiveness and that the national economy is weak and fragile, according to a new survey from Deloitte and The Manufacturing Institute. The survey found that Americans have a jaundiced view of the nation’s overall economic health, with 59 percent indicating that the economy has “not improved or gotten better” in recent years.
Keeping The Chicks In A Row
November 2, 2012 8:05 am | by Lindsey Coblentz, Associate Editor, Food Manufacturing | CommentsThroughout its 89-year history, Just Born in Bethlehem, Penn., has produced such iconic candy brands as PEEPS® and MIKE AND IKE®. The family-owned company prides itself in maintaining a sense of tradition, while continuing to generate growth through innovative production processes.
Choosing Between Air And Electric Clutch-Brakes
October 31, 2012 8:08 am | by Edd Brooks, Senior Product Specialist, Nexen Group | CommentsTo accommodate current industry demands for enhanced cost-effectiveness and productivity, machine builders must consider the performance capabilities and operational overhead of each component that goes into every design. Stopping and starting capacity are two of the most important performance aspects of machine automation, with inferior clutches and brakes having a direct impact on production efficiency and product quality.
Entrepreneurial Nation
October 30, 2012 8:13 am | CommentsRo Khanna spent two years as deputy assistant secretary of the U.S. Department of Commerce, where he worked with the country’s most influential labor leaders to rebuild the nation’s manufacturing sector and increase America’s exports. He recently discussed what manufacturers can learn from the aerospace industry, why Solyndra is not a U.S. solar manufacturing failure, and what he sees for the future of American manufacturing.
The New Paradigm: Lean, Automate, Differentiate
October 29, 2012 8:14 am | by Joel Hans, Managing Editor, Manufacturing.net | CommentsFresh out of college with a manufacturing engineering degree, Duncan believed that he could revolutionize the furniture industry by eschewing old-line manufacturing processes and focusing on Lean and burgeoning technology. He incorporated American Leather in 1990 with a simple-but-bold premise: He would make custom leather furniture and get it out the door in less than 30 days.
U.S. Industrial Manufacturers Remain Positive
October 29, 2012 8:13 am | by PwC | CommentsDespite continued uncertainty about the prospects of both the U.S. and global economies, the majority of U.S. industrial manufacturers remain positive regarding the overall revenue outlook for the next 12 months, according to the Q3 2012 Manufacturing Barometer released today by PwC US.
