Fire crews battled a large blaze at a meatpacking plant south of Milwaukee on Monday, and authorities warned residents within a mile of the plant to leave the area because of the threat of toxic fumes. About 100 firefighters were battling the blaze at the Patrick Cudahy Inc.
The past few weeks in Louisiana have demonstrated there are certain things economic developers armed with the taxpayers' checkbook can accomplish, and others they can do little about, especially during the current recession.
Of all the hydrocarbons and simple sugars that can be made from biomass, or recovered from fossil reserves, gasoline, diesel and natural gas remain the most important end-products and are likely to remain so for some time to come. Into that mix comes the advent of biofuels, and in recent years the arrival of what are variously termed “second-generation” or advanced biofuels.
Exelon Corp. on Thursday sweetened its hostile takeover bid for NRG Energy Inc. by 12 percent to $8 billion in stock, citing newly identified cost savings along with NRG's recent deal for Reliant Energy's Texas retail business.
The Obama administration launched investigations of hundreds of businesses around the U.S. Wednesday as part of its strategy to focus immigration enforcement on the employers who hire illegal workers. Immigration and Customs Enforcement has begun notifying businesses of plans to audit their I-9 forms -- employment eligibility documents that employers fill out for every worker -- the agency told members of Congress in an e-mail Wednesday.
Hugo Spowers is an inventor with a dream -- perhaps an impossible one. After nearly a decade of mighty labor and no little expense, he has built a hydrogen-fuel cell car--albeit one so tiny it's more like a buggy. If the money holds out, he intends to make 50 more of them and then test market the Riversimple Urban Car by leasing it out to residents in a British city center in just three years.
A $2.4 million state grant will be used by a General Electric Co. subsidiary and the University of Southern Mississippi for research on composite materials for an engine to power the Boeing 787 and 747-8 aircraft.
The LT-960 dual tire inflator allows users to automatically inflate two tires at a time through the use of two four foot hoses with lock-on air chucks and a pre-settable regulator/gauge. The LT-960 is ideal for large truck tires. Learn more: www.ltitools.
Van Air Systems recently announced the successful start-up of four model HB3000-S blower purge compressed air dryers by Intermountain Power Service Corporation (IPSC) at the Intermountain Power Project (IPP). The company projects that the dryers will yield an annual savings of approximately $225,000 attributed to reduced energy and maintenance costs.
PPT VISION, Inc. recently released the IMPACT™ Software Suite 8.3, the latest installment of the company's vision software. IMPACT 8.3 pairs with smart camera technology to provide enhanced usability and inspection capabilities for challenging machine vision applications.
Detcon has introduced the Model 880-N4X, a PLC-based control and alarm system designed to monitor and control multiple gas detection sensors and other field devices. The main system is programmed as a Modbus master with two options available, the Model 880S-N4X for up to 32 addressable field devices, and Model 880A-N4X for up to 72 analog devices via Detcon’s DA4 Modules (4 channels per module, up to 18 modules).
Schneider Electric’s TeSys® T advanced motor management system is designed for the management of critical processes. Used with short circuit protection and a contactor, the TeSys T provides full monitoring, control and protection for electric motors. According to Schneider, the TeSys T’s innovation starts with the capability to be seamlessly integrated into an automation system.
A report on manufacturing activity shows the sector contracted less than expected in June, posting its best showing since last August and another sign that a recovery may be near. Manufacturing sectors overseas also are rebounding a bit, according to new reports, but other U.
The PROACT® Logic Tree Knowledge Management Templates from Reliability Center Inc. are an aggregation of experience garnered from more than 800 field investigations. The analyses have been thoroughly reviewed and their results compiled to form this unique, single Root Cause Analysis Knowledge Base.
General Motors Corp. said Monday it is ending its joint venture with Toyota Motor Corp. at a Fremont, Calif., manufacturing plant, bringing to a close the first partnership of its kind between a U.S. and foreign automaker as GM continues to downsize under bankruptcy.
Hyundai Motor America said Tuesday it will launch an incentive program that guarantees the price of gas at $1.49 a gallon for a year for U.S. consumers who buy or lease its vehicles by Aug. 31, as the automaker looks to win over customers uncertain about the direction of fuel prices.
Caterpillar Inc. is launching a line of diesel-electric hybrid bulldozers it says will improve fuel efficiency 30 percent while maintaining the power the company's customers expect. According to Caterpillar, the D7E, which was 10 years in the making, is to go into production in East Peoria in October.
According to DEACOM, its Integrated Accounting and Enterprise Resource Planning (ERP) Software System integrates all areas of a process manufacturing business– laboratory and formula management, inventory management, Material Requirements Planning (MRP), lot tracking, production, quality control (QC), expiration date management, sales, purchasing, CRM, environmental reporting, electronic document management, labor tracking, Point of Sale (POS), and accounting– in a single software solution.
Specifically engineered for the unique challenges of a narrow-aisle warehouse environment, the Crown RR 5700 features the industry’s first traction control system, enhanced execution of load-handling functions, and the fastest lift and travel speeds among other available reach trucks.
BioFit Engineered Products has announced its new Intensive Plus line of 500-lb. capacity, continuous use chairs, recently rated compliant with the U.S. General Services Administration (GSA) requirements for 24-hour intensive use in severe environments. Featuring a fully contoured profile, the Intensive Plus chair has a 21" wide saddle-shaped seat with a waterfall front to ensure even weight distribution, and comes standard with an executive style seat pan control so users can quickly and easily adjust the seat position.