Articles
The Lead
Connecting The Back Office To The Plant Floor
May 22, 2013 | by Karie Daudt, Director of Marketing, TURCK | Comments
Though industrial Ethernet has been evolving for many years, it is quickly becoming the foundation for many manufacturing applications. Industrial Ethernet provides the connectivity and communication that today’s applications demand for productivity and efficiency improvement.
Comparing Low Harmonic Drives In Light Of IEEE 519
May 21, 2013 8:05 am | by Wolfgang Hilmer, Project Manager, Siemens Industry | Comments
The most commonly used standard in the electric industry for limiting the harmonics in supply...
Preparing To Succeed When Your Network Has Been Breached
May 21, 2013 8:00 am | by Jeff Multz, Director of North America Midmarket Sales, Dell SecureWorks | Comments
Since it’s almost certain that every organization will experience a cyber security incident at...
Labor Productivity And Global Competiveness
May 20, 2013 8:00 am | by Simon Macpherson, Senior Director Operations, Kronos EMEA | Comments
When it comes to managing the workforce, very few industries are under more pressure than...
FREE Email Newsletter
Daily industrial news and top headlines for plant and maintenance managers
Roof Recoating Enhances Workplace Safety
May 17, 2013 11:19 am | by Del Williams, technical writer | CommentsMany industrial facilities such as petrochemical plants must remain safely, efficiently operational with virtually no downtime, unplanned maintenance, or replacement for decades. To protect equipment from corrosion, traditionally three separate coatings are used, often in a zinc, epoxy, urethane combination. While this is common, it is far from optimal.
Building U.S. Manufacturing Strength
May 17, 2013 11:19 am | CommentsDouglas K. Woods, President of The Association For Manufacturing Technology, discusses the state of U.S. manufacturing, job development, and what the industry can expect going forward. While today’s manufacturing industry is more sophisticated and high tech than ever before, he says, the industry still needs to address some critical issues to be successful in the future.
MRO Data Key To Unlocking Cost Savings & Operational Efficiency
May 15, 2013 8:00 am | by IHS | CommentsMaintenance, repair and operations (MRO) groups at many companies are facing a major challenge: toxic MRO master catalogs stuffed with incomplete data on replacement parts, a problem that drives up costs and creates large-scale problems for multiple corporate divisions.
PwC: Strategies To Enhance Business Opportunities In India
May 14, 2013 8:00 am | by PwC | CommentsAccording to PwC, India has potential to be the fastest-growing large economy in the world over the next four decades, but businesses find its economic and cultural diversity, complicated policy-making processes and uneven development difficult to navigate.
Pest Birds And Corrosive Droppings
May 13, 2013 8:00 am | by Chrissy Hansen, Bird-X Media Correspondent | CommentsPest birds cost individuals and businesses millions of dollars each year in clean-up expenses, repairs, and damaged equipment. Some large industrial facilities spend as much as six figures to combat pest bird problems. Facility managers must understand the important of implementing a preventative bird control program as means of reducing these costs.
Grainger CEO Talks Tools for Tomorrow
May 10, 2013 4:04 pm | CommentsAs the required skill set for advanced manufacturing continues to evolve, many resources emerge to address workforce development needs in the industry. James Ryan, CEO of industrial distribution leader, Grainger, sat down with IMPO to discuss ways in which technical education has been a continued priority for his business — and why the skilled trades have more to offer than many people realize.
By The Numbers
May 10, 2013 3:42 pm | by Anna Wells, Executive Editor, IMPO | CommentsConveying equipment can’t just keep getting faster – it has to get smarter as well. Learn how market conditions, design elements, and maintenance issues work together to create positive trends in the conveyor industry.
That's A Wrap
May 10, 2013 3:38 pm | by Dan Schmidt, Business Development Manager, ITW Muller | CommentsIs the amount of load damage going up with the age of your stretch wrap equipment? Having trouble keeping up with production and the increasing number of SKUs and load configurations? Have a need to do more with less people and feel automation might be the answer? Would you save money on film and eliminate film breaks if you could just improve performance?
A Harder, Greener Cut
May 10, 2013 3:34 pm | by Rachel Leisemann Immel, Associate Editor, IMPO | CommentsWhile tooling may only account for five percent of the cost of producing a typical metal part, it can have an enormous impact on overall production efficiency, quality, and cost. Cutting tool consumers and manufacturers are considering emerging technologies, new tools, and new techniques to continue stay competitive in an increasingly competitive global marketplace.
Don’t Wait ... Automate!
May 10, 2013 3:02 pm | by By Jeff Burnstein, President, Association for Advancing Automation (A3) | CommentsRecently, there has been a large amount of media coverage on the issue of automation technologies taking jobs, especially in manufacturing. Though we appreciated the focus on how technological advances in automation and robotics are revolutionizing the workplace, we were very disappointed in how they characterized the segment as “robots taking jobs” in America.
Vibration Detection For A Safe, Reliable Plant Floor
May 10, 2013 2:49 pm | by Rachel Leisemann Immel, Associate Editor, IMPO | CommentsThere is no such thing as a vibration free machine,” says Steve Matthews, business manager of VibrAlign’s service company, PdM Solutions, Inc. Rotor unbalance, sheave misalignment, worn bearings, loose bolts, and bearing lubrication issues can affect every machine on the plant floor. And when they do, costly and dangerous failures can result.
Intertech Plastics Completes $2M Investment
May 10, 2013 2:43 pm | CommentsIntertech started 2013 off in a big way, after the addition of 2 new Husky 1100 ton high-speed molding presses, related automation, and state of the art centralized chilling system. These moves allow Intertech to support its clients’ needs for high quantity injection molded product production, warehousing, and distribution to the western United States, within a cost structure that keeps Intertech competitive in the global marketplace.
Industrial Doorway Accident Prompts Metal Fabricator’s Air Curtain Installation For Safety
May 10, 2013 2:40 pm | CommentsAfter several near-misses culminating with an injurious forklift truck collision involving strip curtains, a Northeast Ohio metal fabricator and manufacturer searched for creative solutions to improve safety, energy efficiency, and productivity at a high traffic ground level material handling doorway.
Raising The Bar
May 10, 2013 2:23 pm | by Krystal Gabert, Editor, Food Manufacturing | CommentsHearthside Food Solutions is a young company with deep roots. Co-founded in 2009 by a group of investors led by Hearthside Chairman and CEO Rich Scalise, the company strives to be the largest and best contract manufacturer of snacks in the country.
Don’t Get Wrapped Too Tight
May 10, 2013 8:05 am | by Greg Cober, Altra Industrial Motion Product Training Manager | CommentsA properly installed wrap spring clutch/brake will provide millions of cycles for applications where repetitive motion is needed. Care to insure proper mounting will achieve the best possible life and performance in repeating applications.
