4 on the Floor
For maintaining a 487,000-sq.ft. floor in a engine-building factory, diamonds can be a plant manager's best friend. Find out how the process works and plan to save $1.50-$5.00 per ft.
The World Engine manufacturing park in Dundee is composed of two 487,000 square foot facilities approximating the size of 20 football fields with North and South employee service facilities, a plant management and operations facility and the GEMA world headquarters building. The North plant, opened last year in Sept. 2005 opened its doors for production of 1.8-liter, 2.0-liter and 2.4-liter engines; and the South plant, which just opened in October of 2006, is being equipped for a 2007 startup. Combined the facilities will have the capacity to build 840,000, four-cylinder engines annually.
The advanced modular crossover facilities were designed to carry the heaviest loads required while remaining flexible enough to handle all potential manufacturing operations. The engine plants had to have strong and stable concrete floors due to the required precision operations of the massive process machinery, trenches and flumes. The interior slabs on-grade utilized 25,000 cubic yards of concrete. Maintenance of the floors, in a dirty business like engine building was going to be a big issue.
|The Diamond Grinding Process|
|Step one: Diamond segments are bonded in a metallic matrix for use in heavy-duty polishing equipment.
||Step two: These diamond abrasives embedded in a plastic or resin matrix fine-grind the concrete surface.
||Step three: A process called "lapping" uses ever-finer grits of polishing disks to refine the sheen.
||Step four: During the final polishing step, a commercial polishing compound is spread onto the surface to give the floor a bit more sheen.|
The management team met in early 2003 to begin work on the plants. Holly F. DuMont, a facilities architect for DaimlerChrysler's AME Core Facility & Launch Building Group, proposed diamond-polished concrete rather than the standard clear sealer and/or a two-part epoxy paint to cover the World Engine plant's nearly one million square feet of steel pin reinforced manufacturing floors. "Polished concrete is not burnished or buffed with a pan or a polished topcoat of chemical hardener that simply wears off. This is the real thing concrete slabs specifically designed to be ground and polished with diamonds like granite producing a lifetime shine," said DuMont.
Lessons Learned During Manufacturing
contractor; working closely with the concrete provider, followed up with
a methodical installation plan divided by traditional disciplines facilitating
the construction speed while avoiding potential problems. Since "out-of-the-box"
thinking encourages higher risk taking, there certainly were many obstacles
to overcome. But if Holly DuMont had to choose one very important lesson
learned during the construction of the GEMA Facilities it was the following:
"In the case of the concrete contractor hiring the polishing contractor:
the general contractor must listen to the polished concrete experts. When
a problem is identified in the field by the polisher, the concrete contractor
can no longer assume, because they have been placing concrete for 35 plus
years, that they know all. They must listen to and address all issues.
They must discuss all aspects of the job with the polishing contractor
upfront, avoiding costly mistakes.
During the final polishing step, some contractors spread a commercial polishing compound onto the surface to give the floor a bit more sheen. These compounds also help clean any residue remaining on the surface from the polishing process and leave a dirt-resistant finish.There are not published standards for polished concrete, but it is generally agreed that the concrete must be polished through the sequence of disks ending with 1800-3500 grit diamonds to be considered polished concrete. At this level the concrete will exhibit a glossy sheen and high reflectivity without the use of a topical coating.
A diamond ground (flat) slab polished to a 400 grit (NW3) level will yield an minimum additional 35 percent reflected light as compared to traditional sealed or painted floors offering no more then 7 percent regardless of floor color. This is not the perception of more light often attributed to white or light colors but the actual light reflected back into the facility as measured with a specular gloss measurement device. Illumination for the GEMA manufacturing facilities is provided with ribbon windows and suspended metal halide (400 Watt) pendant fixtures. The GEMA quartz floor was polished to a 100 grit level (NW1) allowing 12 fixtures per bay to provide the light levels of 15 fixtures.
Once the floors were completed, DuMont had a clear understanding as to the care and maintenance of the polished concrete floors. "The minimal maintenance required over the life of the PC floor was one of the things that attracted me to the polished concrete concept." explained DuMont.
In manufacturing plants daily maintenance includes chemicals, strippers, degreasers and other expensive non-environmentally friendly products for daily and weekly cleaning. Heavy abrasives are a common method of cleaning rough concrete floors that catch and hold dirt, grease, and tire marks etc. "With polished concrete all you need is neutral PH soap, clean water and a soft nylon head on a standard scrubbing machine" said DuMont.
After the extraordinary efforts made to ensure the success of the finished product DuMont was concerned that the maintenance staff would fall back on traditional cleaning products and methods. "The facility management company at GEMA approached the new PC floors as if they were polished granite and began a successful cleaning program immediately" said DuMont. "The minimal requirements to maintain PC translate to further costs-savings by requiring fewer man hours, no costly detergents or degreasers, the elimination of annual chemical top-coats touch up and or removal and replacement of epoxy paint over the life time of the floor " said Mike Strohschein owner/engineer construction representative.
Throughout the construction of the plant floors, there were a number of problems encountered. The fact that the industrial slabs were designed poured and finished in a manner that would yield the best surface to be ground and polished was a brand new idea to everyone involved. The rule of the day is edge of slab to edge of slab - with consistency in the fines and cream at the surface and the tested FF(floor flatness) and FL (floor level) being of prime focus. Most often the polishing of concrete floors is an after thought costing upwards of $12 a square foot. With the proper planning a flat, impervious, shiny, maintenance free floor can cost as little as $.88 a square foot.
An example of a more serious problem occurred during the polishing of the North plant during the winter of 2004. "The internal combustion engines of the concrete placing and finishing equipment and portable direct fired heaters inside the enclosed building shell all produce carbon dioxide (CO2). The CO2 sits low over the new slab as it is heaver then air and is absorbed into the bleed water to form carbonic acid. This acid reacts with the calcium hydroxide found in the curing slab causing carbonation" explained DuMont. The polisher came on site to inspect the slabs at seven days after wet cure, recognized the soft porous surface and modified their means and methods to properly accommodate the new slab. "At 10 days post wet cure they were out grinding the floor with a different diamond head selection and revised methods of grinding and polishing that resulted in a tight, durable, dust free, reflective floor requiring minimal maintenance for the life of the slab" said DuMont.