Comparing compressor performances across different manufacturers has long been a difficult task. For a many years, it was all too easy to present data that, although accurate, was potentially misleading. Manufacturers were selective about what information they published as well as what conditions they chose to specify performance. The result was a numbers game that the buyer frequently lost.
Our experience has taught us that people need more than just product information; they also need other kinds of input to make sound decisions about their accounting and manufacturing software. Use these questions to determine just how ready your company is to adopt a new manufacturing system.
A performance plan differs from a conventional plan in that it is a proactive document. It is designed for continuous use throughout the year as a guide and reference tool to direct the leader and his or her unit's activities. The primary purpose of a performance plan is to create results and maximize performance.
Yes, there’s a place for mobile in manufacturing. Seven, actually. Today’s mobile solutions can help your business run more profitably and predictably, by putting the right tools and information right where they’re needed. Load tablets with videos, manuals and instructions to deliver the training and education employees need, where they need it most — on the floor.
Although U.S. manufacturing declined in March, it continues a positive push into 2013. “The Institute for Supply Management (ISM) Index was 51.3 in March, down from 54.2 in February but is still above 50, the dividing point between growth and decline,” said Daniel J. Meckstroth, Chief Economist for the Manufacturers Alliance for Productivity and Innovation (MAPI).
More than a quarter century after hitting its peak, U.S. manufacturing appears to be back. More and more companies from Apple to General Electric, Ford and Caterpillar, are deciding to make their products here. But what is behind this manufacturing renaissance? Why are companies bringing back jobs and what makes those companies think they can succeed?
According to a 2011 article in Welding & Gases Today , the welding industry is poised for significant growth over the next decade. But with well over 200,000 available welding jobs predicted, the industry is not exactly jumping for joy. In fact, this key area of metalworking has long been known for the skill gap it consistently faces. So what’s the problem, who will solve it, and – perhaps most importantly – how?
"Because spare parts are different.” It sounds like common sense, but Phillip Slater will tell you that it’s not always intuitive for manufacturers to view spare parts as a unique area, especially due to some pervasive myths that exist around inventory reduction.
Much like the rest of the physical world, the manufacturing environment is constantly battling against the challenges of time and space. And when it comes to space constraints, as cost conscious manufacturers know, it can often be more economical to go up than out. But when work platforms, or mezzanines, enter the mix, so do a host of potential safety issues.
China1 displaced the United States as the world’s largest manufacturing nation in 2010 and widened its lead in 2011, according to recently published data from the United Nations. Manufacturing value-added in China totaled $2.35 trillion in 2011 while U.S. manufacturing value-added was $1.90 trillion.2
After more than a decade of controversy, there is now unanimity of thought on many of the benefits and evolution of Cloud ERP. Indeed, today, there is common thinking among business and market analysts, software vendors, and system integrators about the role of this vital technology in a business environment. At last, this consensus is finally trickling down to end-users.
Thermal management has been one of the primary concerns for today’s industrial facilities that must rely on maximum performance of sophisticated and highly advanced computers and components. Excess heat generated by electronics, if left unchecked, can damage the effectiveness of components and other intricate equipment inside panels and enclosures.
Controlled-volume metering pumps (also known as metering pumps, feed pumps, or dosing pumps) are reciprocating positive displacement pumps typically used for proportional liquid blending or metered single liquid transfer. These pumps need to be able to perform flawlessly, which means highly accurate, repeatable, and adjustable flow rates.
Although the purpose of an anti-seize may be obvious due to its name, it is a subject not well understood and certainly under utilized. Anyone who has snapped the head off a bolt or screw would sympathize that a lot of time, blood, sweat, and maybe even tears, are wasted when anti-seize is an afterthought.
BMW Manufacturing achieved another record production year. Annual production of 301,519 vehicles marks 2012 as the highest production volume in the Spartanburg, South Carolina plant’s 19-year history. This represents a nine percent increase over the production volume for 2011 (276,065). Since 2010, the plant’s production output has increased by 90 percent (159,284).
The majority of today’s LED solutions are not produced in America. And for the first five years of doing business, that was true for NEUTEX Advanced Energy Group as well. Headquartered in Houston, NEUTEX has become one of a list of companies that have recently moved operations to the U.S. from overseas. Today, the company is developing its Houston presence as it positions itself as a leading manufacturer of LED lighting.
Pressures to reduce staff levels for onsite operations coupled with the increasing sophistication and expense of automation and control equipment have led to growing trend to use modular structures to house and protect sensitive process and automation controls.
Manufacturing Business Technology took time to talk to Frank Hill, director of manufacturing business development, Stratus Technologies, about virtualization. Hill explains what it is, how virtualization can help manufacturers take advantage of the processing power they may already have, and how to mitigate some of the risk facing companies every day.
Reliability in process control systems has a different meaning in each industry. Depending on the type of interruption and the severity of the consequences, some manufacturing systems require PLC redundancy to keep people and equipment safe.
Enterprise software can be a major point of complexity for manufacturers, particularly in the way it seems to change at an incredible speed. In order to help work through some of those changes in product lifecycle management (PLM) software packages, we spoke with Richard Mizuno, a partner at Kalypso.