Kaydon Corporation ’s Bearings Division (Muskegon, MI) is now offering many models of its space-saving HS Series slewing ring bearings, which handle moment loads of up to 139,000 ft-lbs. The ability to deliver heavy load and thrust and space savings makes the series ideal for medium- to heavy-duty applications, such as cranes, aerial lifts, lift truck rotators, and industrial turntables.
VibrAlign (Richmond, VA) has launched a new wireless shaft alignment, the Fixturlaser GO Pro, which uses an adaptive and time-saving user interface, according to the company. Depending on what the measurement results show, the tool will guide the user through the alignment process. In addition, the new tool comes with the Verizontal Compound Move function, which eliminates the need to take more measurements after the vertical alignment.
The new line of High Performance Butterfly Valves from Assured Automation (Clark, NJ) offer Class VI shut-off and an advanced seat design, which provides a bi-directional interference and pressure-assisted seal. The valves are available in sizes from 2” to 12”, with a pressure rating up to 285 PSI for the 150-class, and 740 PSI for the 300-class valves.
Seco Tools (Troy, MI) has announced its new CBM 170 grade, the first PCBM grade developed specifically for the finish turning of nickel-based super alloys. The CBM 170 is designed for both toughness and wear-resistance, which makes it ideal for materials like Inconel 718, UDIMET, Waspaloy, MAR M, and more, according to the company.
Manufacturers have a lot to worry about these days. From the competitiveness of the global marketplace to the seemingly never-ending attempts at heightening efficiency, it’s easy to get bogged down in the minutiae without a clear idea as to where to begin. But becoming bigger and better often requires some sort of expenditure.
In many ways, thermal imaging represents an opportunity to see your plant in a whole new light. It’s a revolutionary technology, one that allows manufacturing processionals to conduct a range of tasks, such as increasing efficiency in automated environments, detecting leaks in malfunctioning equipment, and conducting predictive maintenance.
Since 1925, Dunn-Edwards Corporation has been a leading manufacturer and supplier of architectural and industrial coatings in the Southwest, providing a complete line of paints and painting supplies to professionals and quality-conscious consumers. Dunn-Edwards paints are manufactured exclusively in the Southwest and formulated specifically for the climate of the Southwest.
So where do you start? If your facility was flooded, you have more than a simple moisture issue. Obviously there are many steps ahead of cleaning and drying out the electrical systems (such as debris removal and facility renovation) but let’s suppose you are ready to clean the electrical connections and components.
John Nofsinger is the current CEO of Material Handling Industry of America (MHIA). MHIA is an international trade association that has represented this industry since 1945. MHIA and affiliated organizations have sponsored trade events such as ProMat and MODEX 1012 for 60 years. More information on MHIA can be found on-line at www.
According to a recent New York Times article: Despite the fact that there have been 2 million manufacturing employees laid off since 2007, manufacturers are still facing skilled worker shortages. According to the article, “Plenty of people are applying for jobs. The problem, the companies say, is a mismatch between the kind of skilled workers needed and the ranks of the unemployed.
Given the number of industrial wipes used every day by large and small industrial facilities alike, is it possible for a facility’s use of industrial wipers to be environmentally sustainable? The answer is “yes” if the facility considers the entire wiper product lifecycle in its purchasing policies for this ubiquitous tool.
ST. CLAIR SHORES, Mich. (AP) — Colin Kelly Sikkila has an idea he believes helps make vehicles more affordable for car buyers and more profitable for automakers. A retired metal model maker at the General Motors Tech Center in Warren, Sikkila designed a model car that could be used as a blueprint for building a car with several identical parts on the front and back, such as the hood and trunk lids, doors, fenders and windows.
WASHINGTON (AP) — The Obama administration declined to cite China for manipulating its currency to gain trade advantages against the United States. The Treasury Department on Friday noted that China last June said it would begin allowing its currency to rise against the dollar. The agency said the pace of revaluation has been too slow since and more rapid appreciation is needed.
SAN FRANCISCO (AP) — Ford Motor Co. will increase factory production 13 percent in the first quarter because of higher demand for Ford and Lincoln brand cars and trucks, and further increases are likely through the year, company executives said Sunday. The Dearborn, Michigan, automaker said its sales to individual buyers rose 27 percent in January, a strong increase that shows demand for Ford products like the Explorer sport utility vehicle...
SAN FRANCISCO (AP) — Chrysler's CEO apologized Saturday for the way he described the interest rates the U.S. and Canadian governments are charging on the bailouts his company received in 2008 and 2009. Sergio Marchionne, speaking Friday during an automotive conference in San Francisco, called the interest rates a "thorn" in his side and said that refinancing the two loans would mean no longer having to explain the "shyster rates.
WASHINGTON (AP) — The U.S. labor force has been split into two groups: the relieved and the desperate. Those who have a job are less likely to lose it than at any point in at least 14 years. Those who are unemployed are in trouble. Finding a job remains a struggle 20 months after the recession technically ended.
WASHINGTON (AP) — When President Barack Obama named Gene Sperling as his chief economic adviser, two of Sperling's early calls went to AFL-CIO President Richard Trumka and U.S. Chamber of Commerce President Thomas Donohue. Known for his pugilistic style, Donohue wasted no time. Come on over, he said.
Tom Moran, COO and President of Midwest Plastic Fabricators, stands next to the "ferris wheel," one of many homemade technological innovations he has developed over his 30-year engineering career. Tom Moran, COO of Ohio’s Midwest Plastic Fabricators (MPF), has a unique story to tell.
I recently had the pleasure of traveling to Dallas at the request of Snap-On, the well-known manufacturer of all things tooling. At the event, they educated me and other members of the press on a tool crib that takes all of the hassle out of asset management. All tools removed from the crib are automatically detected by the system.
Melmor Associates Inc. (Niles, OH) has added a new label holder line and material handling identification line. The label holder is a placard label holder, which enables the user to repetitively label returnable containers, pallet racks, and flock racks, without the mess of label and adhesive build-up.