PORTLAND, Ore. (AP) — On the afternoon of May 19, in a single chaotic hour, more than a thousand wind turbines in the Columbia River Gorge went from spinning lazily in the breeze to full throttle as a storm rolled east out of Hood River. Suddenly, almost two nuclear plants worth of extra power was sizzling down the lines — the largest hourly spike in wind power the Northwest has ever experienced.
NEW ORLEANS (AP) — In the blink of an eye, the economic focus in Louisiana has shifted from recession recovery to avoiding actual and potential job losses piling up at a staggering rate. And there's very little that the state can do: The tally is due to the Obama administration decisions affecting petroleum, defense and space — all coming together in a perfect storm.
Recently, the United Auto Workers union approved veteran union negotiator and current Vice President Bob King as their new President. With over 30 years in the UAW, some critics consider King to represent the old school way of thinking — especially as he pushes for fewer worker concessions in a highly competitive, struggling and changing auto industry.
PSI Repair Services, Inc. (PSI, Livonia, MI) has launched a new video that showcases PSI’s repair facilities, advanced diagnostic equipment, as well as the cost-saving services PSI offers. The company offers repair services on electronics (circuit boards, drives), hydraulic components (servos, motors, pumps), industrial robots, legacy system components from all the major suppliers, and more.
Trident Instruments, Inc. (Farmingville, NY) has released the Load Status Indicator LSI-55, a new generation pilot light/indicator. The LSI will turn green when power is available, and unlike other indicators, it will determine if the load is active as well. When the load current is greater than 1 Amp the indicator light will turn red.
DeWalt (Towson, MD) has launched two new Dust Extraction Systems (D25302DH and D25301D) for cordless and corded DeWalt SDS rotary hammers (in 7/8” and 1”), which completes their line of dust extraction solutions. The cordless system with a HEPA filter (the D25302DH) for 36-volt and 28-volt SDS rotary hammers is equipped with a built-in motor, delivering increased suction and high tool performance, according to the company.
Ingersoll Rand (Annandale, NJ) has designed the new 2015MAX and 2025MAX Hammerhead low-profile Impactools, which are designed for optimal performance even in extremely confined spaces. According to the company, the tools have the power and speed of an impact combined with the reach of a ratchet, with a head-height of less than 2”, 180 ft-lb of max torque, and 7,100rpm of speed.
Cost cuts and an improved financial business helped General Electric Co. post its first increase in quarterly profit since 2007, but sales remained sluggish for the industrial giant. The second-quarter results showed that challenges remain for the economy and GE, one of the world's largestindustrial and financial companies.
WASHINGTON (AP) — The once-popular ethanol industry is scrambling to hold onto billions of dollars in government subsidies, fighting an increasing public skepticism of the corn-based fuel and wariness from lawmakers who may divert the money to other priorities. The industry itself can't agree on how to persuade Congress to keep the subsidies, which now come in the form of tax credits worth about $6 billion annually.
PALO ALTO, Calif. (AP) — Toyota Motor Corp. and electric vehicle upstart Tesla Motors Inc. will work together to develop an electric version of Toyota's RAV4 small crossover vehicle, with plans to begin selling it in the U.S. in 2012, the companies announced Friday. Tesla already is working on the electric power system for the RAV4, which looks like a small sport utility vehicle but is based on a car frame.
NEW ORLEANS (AP) — BP finally gained control over one of America's biggest environmental catastrophes by placing a carefully fitted cap over a runaway geyser that has been gushing crude into the Gulf of Mexico since early spring, though no one was declaring victory just yet. Engineers, politicians and Gulf residents will watch anxiously over the next day and a half to see if the cap holds.
TRENTON, N.J. (AP) — Johnson & Johnson said Thursday it will lay off most of the staff at a factory idled over repeated recalls of Tylenol and other popular nonprescription medicines. The healthcare giant said it has decided to make a significant investment in the manufacturing facilities, equipment and laboratories at its plant in Fort Washington, Pennsylvania.
PITTSBURGH (AP) — From the outside, a typical coke plant looks like something from a dystopian science-fiction movie: a maze of metal buildings, pipes, conveyer belts and tall smokestacks belching white puffs of smoke and steam into the air. Inside, there's danger seen and unseen: ovens that heat coal to more than 3,000 degrees, massive steel doors for loading the ovens, moving cars and chutes for coal, and gases that can cause cancer or ignite.
Reading Rock was using SmartPac vibrator shafts to introduce vibration to achieve the half-block height molds. For several years, however, Reading has been using a variation that allows Reading personnel to change the amplitude and frequency. In addition to flexibility never before seen in this application, the technology offers a service life that is fully twice the number of cycles of prior designs.
Greg Galvin, PH.D. founded Ithaca, NY-based Kionix in 1993 to commercialize a novel micromechanical technology pioneered by researchers at Cornell University. From 1993 to 2000, Kionix went from its two founding fathers to a 40-person operation that developed products in inertial sensors, microfluidics, data storage, micro-relays and micro-optics.
ZONEWORKS (Milwaukee, WI) has developed three-dimensional environmental containment enclosures, which are custom-designed and modular to cost-effectively address challenging environmental conditions virtually anywhere within an industrial plant. The enclosures allow users to control temperature, heat, humidity, sound, odor, dust, fumes, and other elements to protect employees or products.
The general-purpose CX Series of pneumatic diaphragm pumps from Almatec (Kamp-Lintfort, Germany) are ideal for low- to medium-duty application, as well as drum pumps, according to the company. The CX pumps have been designed to self-prime and are protected against dry-running, which allows them to empty containers down to the last drop of liquid.
Tencarva Machinery Company (Greensboro, NC) has expanded its territory for representation of the John Crane lines of seals to include Tennessee. The mechanical seal brand names now available through Tencarva in Tennessee include John Crane, Sealol, Safematic, and Flexibox.
KolverUSA (Westford, MA) has developed the SmartMotion Linear Arm, which provides smooth positioning motion for assembly tools, such as screwdrivers, particularly when torque is involved. The arm can absorb the torque reaction while providing ergonomic support for the operator.
Given vending’s long history, the question is: why hasn’t it been more widely adopted for industrial applications? Generally speaking, it boils down to cost. There’s been some great industrial vending technology out there, but the up-front capital expenses have been a tough sell for smaller or medium sized companies.