The SSRC Refrigerated Cycling Compressed Air Dryer from Sullair Corporation (Michigan City, IN) is furnished in nine models, ranging from 175 to 1000 scfm. The dryers utilize the reliable and energy-saving scroll compressor, and a zero-loss drain integrated into the heat exchanger to collect condensate.
Belt Technologies (Agawam, MA) now offers a line of stainless steel vacuum belts for use in the production of solar cells. They run without lubrication of any kind, minimize variations in surface speed, and don’t stretch. The continuous-length belts minimize debris buildup and eliminate frequent shutdowns.
Snap-on Industrial (Kenosha, WI) has a new Level 5 NTC (Networkable Tool Control) system that allows users to manage a virtually unlimited number of lockable tool storage units simultaneously. Critical tools and assets are tracked and the risk of potentially catastrophic foreign object damage.
The Draftguard anti-rotation device from Gates (Denver, CO) prevents belt-driven air-cooled heat exchanger (ACHE) fan drives from “windwilling” when they are idle. A free-spinning fan poses a safety hazard to maintenance workers and causes wear on belts, shafts, bearings, and attached equipment when the fan direction is reversed during start-up.
Intelligrated (Cincinnati, OH) now offers tilt-tray and cross-belt sortation solutions to its product portfolio. Intelligrated now designs and manufactures the complete line of Crisplant sorters, and offers them as standalone sub-systems or as parts of larger automated material handling systems.
Cognex Corporation (Natick, MA) has introduced two new barcode readers to its DataMan line of industrial ID readers. The 100 QL and 200 QL fixed mount readers offer best-in-class 1D barcode reading performance. The included Cognex 1DMax code-reading algorithm handles quiet zone violations that can occur when codes are printed close to the edge of a label.
E-Z Drill (Stillwater, OK) now offers the E-Z Tray, a work tray designed for use on scissor lifts, boom lifts, aerial work platforms, and any equipment with railings. The E-Z Tray provides an ergonomically-friendly solution for the safe handling of tools while working at heights.
Sioux Corporation (Beresford, SD) has redesigned its EN-Series All-Electric line of hot water pressure washers and steam cleaners. The all-electric series now incorporates a more compact frame: the non-explosion proof units have a minimum 43 percent reduction in volume, while the explosion proof units have been reduced by at least 30 percent.
Binder-USA (Camarillo, CA) now offers a new torque wrench for its 7/8” Series 820 connectors. The tool is designed to connect and disconnect field-attachable cable connectors with hex-shaped locking nuts. The wrench ensures the correct torque value and guarantees an IP67-rated connection.
New Pig Corporation (Tipton, PA) introduces the tough PIG® RHINO™ Absorbent Mat, designed to stand up to heavy foot traffic while soaking up liquid and minimizing slips. Features include: A thermally bonded, spunbond polypropylene top layer with zig-zag stitching to enhance strength and resist wear and tear.
Atlas Copco (Antwerp, Belgium) announces its new technology for air blowing applications: the ZS screw blower, which will replace the company’s entire range of rotary lobe blowers. The screw blower can be used in food and beverage, pharmaceutical, pulp and paper, textiles, and other general manufacturing.
For a limited time, customers who purchase a new WIDIA (Latrobe, PA) solid-carbide drill are eligible for a free drill reconditioning. Select WIDIA, WIDIA-Hanita, and WIDIA-Rubig tools are covered under the program. For more information on the offer, or to take a look at WIDIA’s new 800-page Solid Endmills and Holemaking Master Catalog , visit www.
The BANTAM Mini Compression Springs from Lee Spring (Brooklyn, NY) are a response to the need for miniature stock springs that combine strength and corrosion resistance. The springs start at a wire diameter of 0.004”, slightly thicker than a human hair, and range up to 0.
COE Press Equipment (Sterling Heights, MI) has upgraded its ServoMaster Series Roll Feeds with the new ServoMaster 3 Controller based on an integrated Yaskawa MP940 servo drive and motion control package. Other benefits of the ServoMaster 3 include a 500-job memory function, S-curve acceleration for improved accuracy, and 24 I/O ports.
Balluff (Florence, KY) is now offering its mid-sized block style photoelectric sensor, the BOS 23K, which features the conventional sensing modes of diffuse, retro-reflective, and thru-beam. In addition, the BOS 23K also includes background suppression sensors. Other features include: Long sensing ranges for extended sensing ability.